$33.50
2 ratingsSource: AmazonUse the specifications, images, available variations, fitment notes, and referenced part numbers to check this product against your application.
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
*POR-15 High Temp is capable of withstanding extreme temperatures up to 1200°F and will resist cracking, chipping, and peeling *Brush on or thin to spray *Sandblasting is optimum surface preparation
Product facts
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Customer feedback
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
38 Super Shooter –
Make sure you bake it carefully. I used the whole POR system to paint my disk break rotors for my Jeep. I multicoated the cleaner and PORs prepped doctors then let dry. I first cured them at 250 then let cool. I top coated them with high temp engine paint. I did three thin costs. Learned the hard way to do thin coats. I baked the rotors as recommended until completely fired then cooler. I was so excited i forgot to take photos!! They turned out great. After snow and salt, i will post some photos and results.
John M. Geiger –
I purchased a used Weber Grill off of Facebook Marketplace to replace parts on my grill that was rusting after 6-7 years outside. In purchasing the grill I found out that grill was kept inside so there was no rust to contend with, just some very minor surface rust in just a few spots. The sides of my grill I am replacing I prepared by sanding and cleaned/decreased before applying 2-3 coats of grey high temp POR-15 spray paint. After I let sit for 24 hours, I then lightly wet sanded the POR-15 pieces with 600 grit and then thoroughly cleaned. To protect and enhance each piece I then used a quality clearcoat on each piece, putting down 3 coats. After drying for 24 hrs, each piece looks better than brand new. I learned that POR-15 can break down from direct sunlight without painting over POR-15. Although I will see how these pieces hold up after a year and more, so far it looks great after 2-3 months.