Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Oil Dipstick, Braided Stainless Flex Tube With 1/4inch NPT Fitting Included Will Fit BBC Oil Pans
Vehicle information
Available fitment details
Listing compatibility notes
- Fit type: Vehicle Specific Existing "full" and "fill" dipstick marks can be used as, or new marks can be added to indicate desired oil level.
- 3 pounds Oil Dipstick, Braided Stainless Flex Tube With 1/4inch NPT Fitting Included Will Fit BBC Oil Pans
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A dipsticks & tubes listing with source specifications kept visible for comparison.
Fit and size notes
- Fit type: Vehicle Specific Existing "full" and "fill" dipstick marks can be used as, or new marks can be added to indicate desired oil level.
- 3 pounds Oil Dipstick, Braided Stainless Flex Tube With 1/4inch NPT Fitting Included Will Fit BBC Oil Pans
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
3.9 / 5
51 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Mr Plow –
Really nice dipstick. The flexibility allows you to mount it in many different positions. Well made.
Customer –
Great product.
Customer –
Tried this dip stick on a moroso road race oil pan on a sbc and the angle for the stick to go into the pan is too drastic, making it impossible to slide the stick all the way through because the tip of the stick catches on part of the fitting.
Coreo –
A perfect fit for my moroso oil pan! And a Perfect fit for my 1959 mercury project!
milano decarolis –
This is a nice dipstick but the o-ring fit is too loose and keeps popping out causing oil leakage in the engine bay. I have tried increasing my breather size on my engine and I still have the same problem. I wouldn’t recommend.
NJguy –
Installed this to retrofit my BMW 135i track car with a custom dipstick. Chased a leak for a while and finally found this was the cause of the leak. Oil was leaking from the compression cover that squeezes the plastic/metal mesh tube against the adapter to 1/4″ npt fitting. decided to ditch it all together. quality worse than expected.
Defective –
This item should not be used. Plastic from inside of dipstick tube come off on the dipstick and could easily be falling in the oilpan. This is far from a quality product and absolutly pathetic for $71. Should be 0 stars
Randall gale Kirkman –
You cannot get the set screw on the knob loose so you can’t take the dipstick out itself and cut it to use the factory markings on the bottom of the stick I think Moroso should send me another one anyway I know that’s not going to happen next time I’ll just get milodon thanks for nothing