Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Packing List:
1 x 2-wire Spring Return Damper Actuator Motor
Condition: New
Compatible with:
Honeywell M847D series motors, on popular old ARD and ZD series of dampers, including M847D1004, M847D1012.
(NOT work with Honeywell ZD Rectangular Dampers)
DuroZone #35105 damper Motor & similar HVAC spring-return 2-wire damper actuators by Zone First, Erie, and others.
Specifications:
Voltage: 24vac ± 10%, 60 Hz, 0.36A
Torque Rating: Power open 32 in. oz./spring close 32 in. oz. – torque is consistently delivered throughout the full 90° rotational operating range to open and close the damper, irrespective of whether the actuator is operating in Power Advance Mode (energized) or Spring Return Mode (de-energized)
Speed Stroke: Motor driven 30 sec./spring return 6 sec.
Rotating Angle: 93.5°
Noise Level: Very quiet operation, typically ≦ 40dB at 3′
Reliability: Statistical life reliability exceeds 120,000 cycles at 90% reliability and 100% confidence with no decay in delivery torque over the life of the actuator
Installation:
Step 1: Disconnect the power supply before connecting the motor wiring to prevent electrical shock or equipment damage.
Step 2: Using a hex wrench, loosen the motor coupling from the blade shaft and remove the existing motor assembly.
Step 3: Ensure that the damper blades are in the correct installation position.
Step 4: Loosen the set screw on the motor collar.
Step 5: Place the actuator onto the damper shaft and insert the anti-rotation pin into the anti-rotation pin hole.
Step 6: Double check that your damper blade and shaft are in the correct installation position for your application, then lock the collar onto the damper shaft by tightening the set screw on the collar.
Step 7: Reconnect the motor wiring.
Vehicle information
Available fitment details
Listing compatibility notes
- 【Easy to Install】The damper actuator motor is manufactured to the OE specification to provide factory appearance and direct-fit, just takes 10 minutes to replace the old one.
- 【Fit for】Our 2 wire spring return damper motors are designed as drop-in replacements for Honeywell's M847D series motors on popular old ARD and ZD series of dampers, including M847D1004, M847D1012, and many other damper actuators that use the same footprint.
- Packing List: 1 x 2-wire Spring Return Damper Actuator Motor Condition: New Compatible with: Honeywell M847D series motors, on popular old ARD and ZD series of dampers, including M847D1004, M847D1012.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A damper hardware & parts listing with source specifications kept visible for comparison.
Fit and size notes
- 【Easy to Install】The damper actuator motor is manufactured to the OE specification to provide factory appearance and direct-fit, just takes 10 minutes to replace the old one.
- 【Fit for】Our 2 wire spring return damper motors are designed as drop-in replacements for Honeywell's M847D series motors on popular old ARD and ZD series of dampers, including M847D1004, M847D1012, and many other damper actuators that use the same footprint.
- Packing List: 1 x 2-wire Spring Return Damper Actuator Motor Condition: New Compatible with: Honeywell M847D series motors, on popular old ARD and ZD series of dampers, including M847D1004, M847D1012.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
Reviews below were submitted through this store.
Reviews
There are no reviews yet.