Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Ideal-Tridon display includes 130 clamps: (40) Micro-Gear and (90) 1/2 inch Hy-Gear covering clamping ranges from 1/4 inch to 2 3/4 inch. The Micro-Gear clamps are 5/16 inch 300 stainless steel band width, with a 300 stainless steel housing and a 1/4 inch plated carbon steel hex head. The 57 Series Hy-Gear clamps are 200 stainless steel 1/2 inch band width, a 200 stainless steel housing and a 5/16 inch plated carbon steel hex head. The display organizes your hose clamps and can be displayed on counter or attached to pegboard for easy access. Display contains 20 each Micro 4 and 20 each Micro 6 clamps, 10 each #10 clamps and 20 each of #12, #20, #28 and #36 clamps. Made in USA.
B. Witt –
Came with all hose clamps that it was supposed to. Only complaint is that the stickers indicating the sizes does not adhere to the metal stand. After trying to make it stick several times, it’s still peeling off. Quality of the hose clamps is top-notch.
Steve Soloway –
Overall, Great. All stainless steel clamps. The rack is gray and perfectly welded to hold every size from the smallest to largest with, believe it or not perfect precision. This is a stand that either can be placed on a bench, or it has the ability to be hooked on a pegboard. Top quality, couldn’t want anything better for what it is.
sweetlex5280 –
This is a beautiful thing! I was so tired of running to the parts store constantly. This will save tons of time and the quality is great. You cant go wrong with this purchase.
Itso-good! –
This will keep me in clamps for quite a while. Haven’t used them yet but they appear to be of good quality. If I have reason to change that opinion I will return here and tell what the problem is. I like the display… have it hung up in my shop and they are going to be easy to locate and find the correct one for the application needed.
Toboggan Hill Farm –
The display stand is nice (although the stickers that came with it do not stick to the stand).These clamps, however, are absolute rubbish. I tried eight of them. Two worked. Six failed just as they were getting snug. Four of those were nearly impossible to get off after they failed.When these strip, which in my experience was 75% of the time, they lock onto themselves (the stripped section of the band pushes into the grooves on the band under it). Then the screw, instead of loosening the clamp so the clamp can be removed, simply screws out of the clamp. Then what is left is a clamp that has locked onto itself, and tight enough to hold the hose in place, but not tight enough to keep the hose from leaking.I ended up having to cut some of the bands off. I was working in a tight spot on a car, so cutting them off, without cutting the hoses too, took over an hour. And, I was left with an inoperable car, because I didn’t have clamps that work.Do yourself a favor and avoid these. They will waste a lot of your time.If you happen to find good, sturdy clamps, please let me know. I’m still searching.
B. Bergstrom –
Good quality clamps, takes very high torque to deform them. Good stand, site nicely on the bench top, would hang on the wall if I had more wall space.
Richard L. Misner –
if you turn wrench or just the week end type you need these. If you had to buy each clamp separate you would spend at least 300 $ for all these. they are of great metal and I cant believe I went so long with out these clamps. There a must for the shop.
moocowman –
I’ve given up on trying to find quality hose clamps at super-low prices. They don’t exist. These are top quality, but you obviously pay for that quality.
Brian –
This is the perfect storage solution for my maintenance shop. I re-order the same clamps from my automotive parts supplier when I need to restock individual sizes.
pqpq –
GREAT STAND FOR THE SHOP , EAS OF ACCES AND YOU KNOW WHEN YOU RUN LOW ON CLAMPSEASY TO REFILL , AND GREAT PRICE