Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
Instruction
Open the cap and fill the canister with diluted 250ml liquid/fluids for sufficient spraying time.
Pressurize the aerosol sprayer with air compressor or manual air pump.
The best working pressure between 90 to 110 Psi.
Start your work by holding the air trigger.
Use the mist nozzle for wide range spray or the jet steam is perfect for hard-to-reach spots.
Note
- DO NOT over filling and over pressurizing the sprayer can.
- DO NOT fill with acetone, corrosive, strong acid and alkaline fluid.
- The preset pressure of safety valve is 110 Psi, the excessive pressure will be released automatically when stuffing.
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A spray guns & accessories listing with source specifications kept visible for comparison.
Fit and size notes
- No structured vehicle fitment was supplied; verify the product details against your application.
Specification notes
- Size: Refillable Spray Can + 5 Nozzles, Refillable Spray Can
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
3.6 / 5
593 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Joseph P. Darmon –
So you should know, usage as an air duster was not its primary purpose when designed. For that purpose its okay, not high pressure, but can work for some light dusting.As for its intended purpose, its awesome. I load it with cleaners and use it when detailing my cars. Seems to make the cleaners more active as it leaves in a foamed state. Nothing ridiculous, its similar to how a can of aerosolised glass cleaner comes out. Holds pressure with no issue for a week. Tops out around 90PSI with a safety valve, so you can’t blow it up as long as that valve functions. Robust construction, feels solid. Can be filled by anything with a tire chuck. Bike pump, air compressor, car compressor, etc.The extendable precision nozzle is great for getting a small amount of cleaner into a tight space. Strongly recommend if you have a great cleaner like simple green, but you wish it came in a pressurized can instead of just a spray bottle.Will work with anything not caustic, do not put in bleach or acetate.
Mark J –
I have two of the earlier version of these – press button not trigger. They do what they’re designed for – spray low viscosity (thin) liquids. Negative criticisms miss the point.Some Notes..1. This is not an air duster and not meant to be. Real air dusters use a chemical that turns to liquid at pressure – look it up – and will blast out a gas (it’s NOT air!!) for several minutes. Try it with this and you’ll get a few seconds only. Don’t buy it if you want a gas duster and don’t whine if you do and are disappointed2. Don’t over-pressurise it. It says 90 to 110psi and is fine at that. There’s a pressure release valve so it should not be possible to exceed this. If you defeat the valve and use higher pressures expect it to explode and possibly cause serious injury. Don’t do it!!3. It’s aluminium. Don’t use corrosive chemicals because many will eat into the aluminium, weaken the can and cause it to rupture. Stick to solvents and lubricants only.Now comments on how well it works when used for its intended purpose..Generally it does what it’s supposed to do and not only does it save a fortune in aerosol cans but it also allows you to spray custom mixes…1:1 WD40 and Fluid Film say…..but there are some niggles with it.1. No filter on the pickup tube – so if you get any contaminants in there it will clog the nozzle. This is a real pain. Either use very clean fluids or pour them in through a fine mesh filter. Or buy a fine mesh fuel filter and stick it on the end of the pickup tube ..see photo. This works if used upright but if you invert the can it switches to a different inlet and will bypass the filter2. The plastic around the base of the steel spray tube eventually crack and it leaks. This is is a killer and a major complaint. I have two of these and both failed the same way. Because it’s so useful I fixed it by pulling out the steel nozzle to allow the crack to close, wrapping a fine stainless steel mesh around the plastic and using a hot iron (plastic welder) to embed the mesh into the plastic and hold the crack closed and reinserted the steel nozzle. Been OK for over a year now but you shouldn’t have to do this!!! Bad design3. Loses pressure as it empties. But his is really a minor thing and hard to design out if you’re a manufacturer. Cause – as you’re using compressed air not a volatile propellant as in a normal spray can then as the can empties the pressure will drop. The more liquid you put in the less room for air and the more the pressure drops. Best to fill say 50% and pressure will then only drop 50% from full to empty….or just top up pressure occasionally from an air compressor.Overall very useful but some flaws. Worth buying despite the somewhat high selling price
S3LD3R3Y –
I have veen looking for a profuct like this for a while, and this one really exceeded my expectations in terms of quality and functionality.Delivery took some time, but I am very happy overall.Highly recommended to anyone on the market for a portable spray cans
nfinit –
Update 3/20/24: increased the open volume from about 1/5 to 1/3 and the extra pressurized volume allows for proper operation (which makes sense). Operator error on the initial now it works great.This would be a great tool, but mine will not hold pressure. Leaves through the nozzle almost as quickly as it’s filled. Drops from 100-10psi in about 15 seconds. I’d prefer to contact customer support to do this but the website (not through Amazon) requires you to create an account to see their contact info.
martial fillion –
bien
Jerico –
I go through a lot of brake cleaner, so this tool made sense to me. I bought a 5-gallon container of brake clean and started using the refillable spray can. I filled the spray can halfway with brake clean and added 90PSI of compressed air. The spray can instantly clogged. I cleaned it out and was underwhelmed with the dual nozzle spray/straw it came with so I used one of the nozzles from Spray Can with Nozzles Kit version I bought. The Spray Can with Nozzles Kit version was also delayed a few weeks. The head of the spray can is plastic and I’m afraid I’m going to snap it one day. It feels a little cheap. Same goes for the dual nozzle spray/straw it came with. As mentioned before, I prefer to use one of the simple beefy nozzles from the nozzle kit version I bought. When the spray can clogs, I remove the nozzle and shoot compressed air in the opposite direction to clear it up. I put that one on me as debris can be introduced to the bottle when I refill. The can bulges a little when filled to 90PSI. It’s a bit scary at first but it’s fine. Other annoying issues is the trigger sticks sometimes when I let go of the trigger causing the spray can to continue to spray. There is a trick to get it to only spray when you want it. You can’t squeeze the trigger all the way if you want it to stop right away. I’m not sure if this is on purpose. All-In-All, the refillable spray can works but it’s a bit clunky.
Yves Larocque –
La bouteille est de bonne qualité et fonctionne très bien avec du kleen-flo . Reste à voir si elle est durable.
Bob the Butler –
I purchase this to spray antirust oil (Krown) to use around the yard and for my vehicles. However maybe due to the thickness of the oil, it only spray as a jet no matter if you use the nozzle or reg sprayer. Unfortunately I had to return it.
DrD –
As advertised, can use various fluids in it for cleaning
me –
Only giving this a 1 star because it won’t let me give it 0 stars Like all the other bad reviews this one is no different. Filled with brake cleaner and worked great the first time, picked it up not 2 minutes later and didn’t work at all. pulled trigger assembly apart and every O-ring swelled or split. Replaced the O-rings and emptied, cleaned and filled with WD-40, same thing. Modified the spray section of the nozzle(the 2 piece sprayer is a joke) to spray straight through and can use it for wd-40 at least. Last one I will ever buy from this company.