Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
-
-
Check hub bore
-
-
fitments
fitments
- 1988-2005 for Blazer 1967-2001 for Camaro
- 1980-1989 for Caprice 1964-1972 for Chevelle
- 1962-1965 for Chevy II 1984-2019 for Corvette
- 1959-1970 for Impala 1982-2004 for S10
- 1983-1994 for S10 Blazer 1996-2002 for Jimmy
fit for
This spacer adapter includes open end lug nuts to secure the spacers onto your factory hubs
If your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
1) Shorten the factory studs
2) The wheels need to have the open slots (cavities) between mounting holes.
3) Purchase a set of shorter studs and replace them with the factory studs.
Ron –
I bought this set of 4 spacers for my 1987 Chevy s10 (2wd/rwd) so I could fit camaro wheels on. If you plan on doing the same I would recommend also ordering new extended wheel studs at the same time. There’s a set on Amazon for 10 wheels studs at around $40. Now as for the spacers, they do exactly what they’re supposed to! It’s a bit tougher getting them to go on flush to your hub. I recommend using a wire brush on a drill and some 60 grit sandpaper and take a nice thin layer off of your hub. Even after sanding down both the front and rear hubs, these spacers were just barely squeezing on. Which in my opinion is a good thing. After finally getting them on, I torqued down my lug nuts and then put my wheels right on. Perfect fit and quality is a solid 7/10. (Although the ad says these spacers will NOT fit the front of your Chevy s10 (2wd) they 100% do fit, and they only put that on here to avoid liability issues. Overall a great spacer, and gets the job done!
Robert Miller –
Quality looking aluminum. Quality looking machining quality looking hardware. No complaints. Got these to mount some corvette salad shooters on my Sonoma.
Jamie B –
Needed a lil space, worked great.
Gary Jensen –
Excellent product torqued to factory specifications and everything worked good
Freddy martinez –
Excelente 👌 quedo perfecto
wayne –
Only gave 1 star because it wouldn’t let me give a 0 rating !!! Don’t waste your time or money, they don’t fit. Don’t fit wheel hub properly or the wheel. Totally useless hunks of aluminum.