Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
| Color | black |
|---|---|
| Brand | BumperX |
| Product Dimensions | 62″L x 5″W |
| Fit Type | Universal Fit |
| Item Thickness | 0.07 Inches |
| Surface Recommendation | Bumper |
| Manufacturer | AMG |
| OEM Part Number | 888-0987 |
| UPC | 868701000268 |
| Item Weight | 1.54 pounds |
| Item model number | 888-0987 |
| Manufacturer Part Number | 888-0987 |
| Position | Rear |
Product Description
Restore your vehicle’s good looks while preserving its bumper with BumperX’s rear bumper guard. It’s a cost-effective option when you want to conceal minor blemishes. The black rubber complements all car paint colors. Simply stick and forget it!
Set It & Forget It
Our full rear bumper protector comes with a strong adhesive that is designed to stick for years. It’s easy to peel and attach to your bumper. You don’t have to worry about car exterior accessories like this falling off while driving.
Alternative to Bumper Repair
No more expensive visits to the autobody shop to fix and repaint your bumper. Our BumperX bumper guard will adhere over deep scratches, puncture holes, chipped paint, and almost any small damage on your bumper. It won’t look as nice as a repaint, but you can still keep that sleek look. Plus, your wallet will thank you!
Easy Installation
Step 1: Prep Bumper. Wash the bumper. After it dries, rubbing alcohol and going over the bumper.
Step 2: Center BumperX & adhere to bumper with painter’s tape.
Step 3: Anchoring. Once BumperX is centered, peel one of the corners. Secure that corner to bumper with the sticky backing. Step 4: Set It. Slowly peel paper backing & press down a few inches at a time. Once the BumperX is stuck, press hard on every inch with extra attention to all corners.
Versatile Variations to Choose From
The BumperX car strip is designed to fit most vehicles, right out of the box. Slightly thicker than a quarter, it’s easy to conform, cut, and customize to your car’s flat bumper or as a front bumper protector.
- Universal Fit, 5 inches long x 62 inches wide
- Universal Fit, 6 inches long x 62 inches wide
- Tesla 3 Model Fit
About BumperX
BumperX is a small Bay Area-based company that started with a purchase of a 2005 Prius with a beat-up bumper. We opted to find something to cover the bumper up. Our research about rubber & adhesion became the key to the birth of BumperX.
Preserve your car bumper with BumperX.
WMitchem –
Just installed it about an hour ago, and so far so good. Was a bit more of a PITA to install alone than I anticipated, but not too bad overall. Make sure you use painters tape and that will help. I think if you took a blow dryer to the rubber first, it would make it easier because it just wants to roll back up the way it was packaged. Hopefully it holds up, and I’ll update the listing accordingly. I bought this instead of getting the bottom portion of my bumper painted after an unknown person scratched it all up. (Looks like a bike crashed into it and scraped it or something) And didn’t want to go through my insurance for such a thing, so this helped.
JimmyKitty –
I do like this product and I’m not sure why more companies don’t make them. My only quibble is that it could be just a bit thicker for this price, but it is thick enough.It’s not an actual bumper so it’s not gonna act like one. This is more a decorative bumper strip to prevent scratches — which is exactly what I wanted. If you have real dents in the bumper this might have issues sticking to it. It bends and conforms to shape, but it’s not gonna cover any *real* damage.I will say it cuts smooooooooth. When you want to trim it the scissors, or whatever you use, it cuts nicely. SO if you’re trying to cut around a pattern, like a license plate hole, or a turn signal, etc. this is not a problem. I was able to trim even the slightest bit off to get the edges I wanted.Side note: I did add *edge seal* along the top and sides (where rain would attempt to creep in. I don’t think it ever would, but I wanted to make sure.Also… it comes shipped curled in a roll. You’ll want it to flatten out so put it out in the sun, hold the edges down with something.
Coffee lover! –
This product was fairly easy to install just need two people to line up correctly. The adhesive is holding great so far just wondering will it hold up because I run my car through the wash regularly year round. It looks great and very stylish also covering up scratches on my bumper it was either buy a new bumper or try the Bumper Guard I recommend trying can’t beat the price.
Lisa –
With the plastic bumpers of todays cars this bumper guard is great. Takes 2 to install but once it’s on, it’s on! It covered the scratches and most of all it looks great!! I never knew this existed til now. This product is made well, the rubber is thick and good quality and does just what they advertise.
David Early –
When I saw my 2021 accord sport had scratch marks on the rear bumper -the only thing I thought could do it was a shopping cart. I got this for added protection and it works fine. Adheres well and easy to instal
Kisskk66 –
This is not a traditional Bumper. This is thick tape with adhesive only U roll it on it will not be a bumper guard for ur car it will cover the scratches
Alex –
Looks great on my 2017 White Camry which bumper was scratched from wear and tear!
arjzv –
This is a great solution fora city car which gets scuffed up from scratches when parked on the street.I put mine on and it doesn’t look like it’s peeling off at all after several months. One thing I would advise is to take your time and really press this onto your bumper. Make sure there are no gaps. Press hard!