Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Belt Guard Aftercooler for 5-7.5 Horse Power Motor 3/4 Inch Female NPT Fitting Compressed air can reach temperatures upward of 300°F, so it’s often times important to have an aftercooler in your system. This aftercooler can mount directly to your existing belt guard. The intake and output are both 3/4 Inch Female NPT fittings. This cooler is designed for 5-7 HP motors. The dimensions between the bolt mounts are 17.75 x 8.5 Inches. Please see below for more details and specifications. Features & Specifications: 3/4 Inch Female NPT Fittings Can Mount Directly To Your Existing Belt Guard Dissipates Heat To cool Hot Air For 5-7.5 HP Motors Dimensions Between Bolt Mounts: 17.75 x 8.5 Inches
Vehicle information
Available fitment details
Listing compatibility notes
- 3/4 Inch Female NPT Fittings Can Mount Directly To Your Existing Belt Guard Dissipates Heat To cool Hot Air For 5-7.
- 5 Horse Power Motor 3/4 Inch Female NPT Fitting Compressed air can reach temperatures upward of 300°F, so it's often times important to have an aftercooler in your system.
- The intake and output are both 3/4 Inch Female NPT fittings.
- Features & Specifications: 3/4 Inch Female NPT Fittings Can Mount Directly To Your Existing Belt Guard Dissipates Heat To cool Hot Air For 5-7.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A intercoolers listing with source specifications kept visible for comparison.
Fit and size notes
- 3/4 Inch Female NPT Fittings Can Mount Directly To Your Existing Belt Guard Dissipates Heat To cool Hot Air For 5-7.
- 5 Horse Power Motor 3/4 Inch Female NPT Fitting Compressed air can reach temperatures upward of 300°F, so it's often times important to have an aftercooler in your system.
- The intake and output are both 3/4 Inch Female NPT fittings.
- Features & Specifications: 3/4 Inch Female NPT Fittings Can Mount Directly To Your Existing Belt Guard Dissipates Heat To cool Hot Air For 5-7.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.8 / 5
12 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Richard Sparks –
Works great as an Air compressor aftercooler
Brendan –
Can barely touch the inlet pipe but the outlet pipe is cold to the touch.
Coolguy –
Took a chance on this unit. Mounted to the belt gaurd of a 5hp 2-stage upright Eaton compressor. Outstanding temp reduction (very hot going in, room temp coming out) before going through a large automatic water seperator and into the tank. No water has come out of the tank or air lines yet. None.
Mr Smith –
Took a bit of time to get it installed the way I wanted, but is well worth the cost and effort.
Twodoggs –
Just what the dr ordered to cool your air compressors air
Drew & Kristen Rinker –
Works great and install went well. I like the fact that you can wall mount it. Just 1 thing but not really even a big thing, the picture is backwards from what you will get. Anotherwards the input is top right corner, not top left. And bottom is vice versa. Just information to note when planning