Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Brand: AUTOXBERT
| Brand | AUTOXBERT |
|---|---|
| Color | red |
| Specific Uses For Product | Rear Lights |
| Vehicle Service Type | Car |
| Special Feature | Waterproof |
| Auto Part Position | Rear |
| Lens Color | Smoke |
| Lens Material | Abs,Plastic |
| UPC | 657381002880 |
| Assembly Required | No |
| Manufacturer | AUTOXBERT |
| OEM Part Number | 8155004060, 8156004060, TO2800139, TO2801139 |
| Model | light |
| Item Weight | 2.33 pounds |
| Package Dimensions | 11.73 x 10.75 x 5 inches |
| Item model number | 108R61204 |
| Exterior | Polished |
| Manufacturer Part Number | 108R61203 |
| Special Features | Waterproof |
Product Description
Pair Toyota Tacoma Pickup 2001- 2004 Tail Light
Specification
Lens Color: White+Yellow+Red
Material: ABS Plastic Halogen
Placement on Vehicle: Rear, Right, Left
Voltage: 12v
OEM Part Number: 8155004060, TO2801139, TO2800139, 8156004060
Description
-Perfect match for the original car.
-Easy to install, direct plug and play.
-This product contain 3 Halogen bulbs.
◕‿◕We provide high-quality shopping experience. If you have any questions, please feel free to send us a message.◕‿◕
Brian Corona –
My old taillights were faded and old, and these new ones are much cleaner and brighter. I put them on my 2002 Toyota Tacoma 2.4L single cab pickup. They are an exact fit and have 4 Phillips screws holding them in. They come with the filament bulbs as well.
Samson –
After an hour or 2 of troubleshooting, we found these lights came wired incorrectly which threw all the lights of the truck out of whack (red and green wire flipped on both), the passenger one wouldn’t even light up initially. The pins are a lot thinner material than OE and needed to be bent slightly to make a reliable connection into the connector of the truck. The screws that came with these were also trash quality probably made of pot metal and heads strip easily. I used one of these fixtures on the passenger side, on the driver side I used the factory fixture with the lens of one of these because the factory quality is so much better. If you really need entirely new light fixtures, just buy OE. One star. The lenses are ok. If I kept the factory light on the passenger side too, I would have just used the lenses off of these and that’s it on both sides. If we weren’t experienced troubleshooters, we could have wasted so much time trying to find the problem.
OSCAR MEZA –
Excelente
Wanda Tabales –
Perfecto a la Toyota tacoma 2004
Customer –
Just installed on my 2003 tacoma wires are installed backwards didn’t have time to fix properly. After work I. Going to plug my old housings back in and use the new seals and lenses. Not worth buying trust me unless you just want new seals and lenses .
Lynn Burress –
DO NOT BUY! These lights caused my wiring harness to short out, costing me thousands of dollars in repairs at a dealership to repin and comb through the entire wiring harness as they are impossible to source for these old trucks.
Thomas J. Lambert –
Don’t buy. This part was wired incorrectly, there was a short, the plug pins are very flimsy, and 4 of the bulb holders were so flimsy they couldn’t hold the bulb.
RySu –
These are wired incorrectly. The turn signal causes the brake lights and reverse lights to flash instead of the actual signal. Lucky I could use the actual lense that broke and keep the OEM housing. Otherwise this would be 1 star.