Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Brand: Marketplace Auto Parts
| Brand |
Marketplace Auto Parts |
| Material |
Aluminum |
| Style |
Modern |
| Measuring Range |
100 – 260 °F |
| Mounting Type |
Flange Mount |
| Output Type |
electrical signal |
| Specific Uses For Product |
automotive |
| Upper Temperature Rating |
260 Degrees Fahrenheit |
| UPC |
195103221480 |
| Manufacturer |
Marketplace Auto Parts |
| Item model number |
W0177-P695297 |
| Manufacturer Part Number |
W0177-P695297 |
Aluminum Engine Coolant Thermostat and Housing Assembly – with 2 Sensors and Bypass Hose – Compatible with 2001 – 2005 Ford Explorer Sport Trac 4.0L V6 (Dual Clip-In Style Sensors) From 7/24/2000
Note: ALUMINUM Thermostat Housing Assembly; Dual Clip-In Style; With (2) Sensors and Bypass Hose Kit
Important Note: For Vehicles with Dual Clip Style and 2 Sensors (Included); Upper Housing is Angled to the Right (Passenger) Side; Includes Bypass Hose Kit
Compatible With or Fits:
Note: Fits From 7/24/2000; With 2 Clip-In Style Sensors
– 2001 Ford Explorer Sport Trac 4.0L V6
Note: With 2 Clip-In Style Sensors
– 2002 – 2005 Ford Explorer Sport Trac 4.0L V6
Vehicle information
Available fitment details
Listing compatibility notes
- About this item ALUMINUM Thermostat Housing Assembly; Dual Clip-In Style; With (2) Sensors and Bypass Hose Kit For Vehicles with Dual Clip Style and 2 Sensors (Included); Upper Housing is Angled to the Right (Passenger) Side; Includes Bypass Hose Kit Compatible with or fits: (Note: From 7/24/2000; With 2 Clip-In Style Sensors; 2001 Ford Explorer Sport Trac 4.
- 0L V6) Compatible with or fits: (Note: With 2 Clip-In Style Sensors; 2002 - 2005 Ford Explorer Sport Trac 4.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A thermostat housings listing with source specifications kept visible for comparison.
Fit and size notes
- About this item ALUMINUM Thermostat Housing Assembly; Dual Clip-In Style; With (2) Sensors and Bypass Hose Kit For Vehicles with Dual Clip Style and 2 Sensors (Included); Upper Housing is Angled to the Right (Passenger) Side; Includes Bypass Hose Kit Compatible with or fits: (Note: From 7/24/2000; With 2 Clip-In Style Sensors; 2001 Ford Explorer Sport Trac 4.
- 0L V6) Compatible with or fits: (Note: With 2 Clip-In Style Sensors; 2002 - 2005 Ford Explorer Sport Trac 4.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.4 / 5
84 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Gramps –
Took only a little more effort the expected. Works perfectly. Now only time will tell.
Alma –
Fit like oem, worked well.I would recommend this seller and this product to others.
idcm –
As expected, good fit, everything worked.
woof –
Housing is top notch as far as craftmanship goes and will in my opinion be the final housing I will use for this vehicle. To save a lot of time from installing it a couple of times and patience not too mention wasting antifreeze. And it is a pain to install on a 4.0L ford engine. If you are not installing new sensors get new o rings for the old ones or you are guaranteed to have a leak. Also if reusing the old 2 hoses on top as I did. Get new adjustable hose clamps like the ones that comes with the unit, you will need one for each hose. Especially for the small hose. The old clamps are not strong enough to seal the hoses on the unit since the old hoses may not be malleable enough to properly seal on the inlet spouts. Finally do not use any sealant on the mating surfaces and that they are cleaned up thoroughly. Experience is a harsh teacher.
Warren –
Love this upgrade from the plastic OEM. this kit includes everything you need. A definite must have.
Yokosuma –
Seems like a good idea (metal vs plastic) but it has an Achilles heal. The smaller tube that seats atop housing is pressed into said housing then sealed with a sort of rtv/plastic. Within a short time it will start to leak. The leak will be ever-so-slow at first but then noticeably faster. It will run down then pool in the engine valley before making it to the ground. This was my second attempt to replace the original plastic thermostat housing with metal ones and both leaked at that tube. I wouldn’t plan long trips on a hot day with this ticking time bomb. Also, this remove & replace job is approx. 2.5 hrs and so wasted time/effort. Unless that tube is welded solidly to housing I would NOT RECOMMEND!
Monte G Taylor –
The part fit just like the original part did, but now won’t break like the plastic piece.
Kurtis jones –
So my factory housing unit had split along the seam. Had no choice and why buy a plastic one when you can get this! For the same price. We’ll worth it. Everything you need too. Don’t bother with replacing sensors or thermostat. Everything all together when it arrives. Just yank old one and slap this baby in. Connect the hoses and good to go.