Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
| Color |
Black |
| Brand |
XMT-MOTO Motorcycle Parts |
| Material |
Iron |
| Bike Type |
Cruiser Bike, Harley-Davidson |
| Product Dimensions |
8″L x 1.25″W |
| Manufacturer |
XMT-MOTO Motorcycle Parts |
| UPC |
644925610526 |
| Country of Origin |
China |
| Is Discontinued By Manufacturer |
No |
| Manufacturer Part Number |
XMT-BJ2748-NEW-01 |
Description:
Black glossy powder coated T-Bar handlebar
High class quality and very durable
Good Working Condition and Easy to Install
Conditon:100% Brand New
Color: Black
Material: Iron
8″ rise. 1 1/4″-diameter center section tapers to 1″ so that standard handlebar controls fit.
Come with oversized drilled wiring holes to accommodate any internal wiring.
Right side has a flat spot near right side handle to accommodate for proper fitment of mastercyclinder.
Feature:High class quality and very durable,Good Working Condition and Easy to Install.
Fitment:
To fit for All Harley-Davidson FLST, FXST, Sportster XL, DYNA, LOWRIDER, 48 Sportster, including Throttle-by-wire models, and any Custom Application.
Buyer needs to check the application according to the measurement above.
Package included:
1 x handlebar
Vehicle information
Available fitment details
Listing compatibility notes
- 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit Come with oversized drilled wiring holes to accommodate any internal wiring.
- To fits for All Harley-Davidson FLST, FXST, Sportster XL, DYNA, LOWRIDER, 48 Sportster, including Throttle-by-wire models, and any Custom Application.
- 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit.
- Right side has a flat spot near right side handle to accommodate for proper fitment of mastercyclinder.
- Fitment: To fit for All Harley-Davidson FLST, FXST, Sportster XL, DYNA, LOWRIDER, 48 Sportster, including Throttle-by-wire models, and any Custom Application.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A handlebars listing with source specifications kept visible for comparison.
Fit and size notes
- 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit Come with oversized drilled wiring holes to accommodate any internal wiring.
- To fits for All Harley-Davidson FLST, FXST, Sportster XL, DYNA, LOWRIDER, 48 Sportster, including Throttle-by-wire models, and any Custom Application.
- 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit.
- Right side has a flat spot near right side handle to accommodate for proper fitment of mastercyclinder.
- Fitment: To fit for All Harley-Davidson FLST, FXST, Sportster XL, DYNA, LOWRIDER, 48 Sportster, including Throttle-by-wire models, and any Custom Application.
Specification notes
- Size: 8 inch, 10 inch
- Color: Black, Chrome
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
2.9 / 5
24 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Cody C. –
Nice thick bars with taper down for the grips spot came in wrapped few nicks in the paint from shipping of course! Pre drilled for internal wiring to go thru bars as well! Down side was the threads in bar on bottom don’t seem like they hold very well!! Even used lock tight n no didn’t over tighten for that reason as well!! Hoping can fix this issue!! We’re a little wider then had expected but still feel very well!
william martinez –
After installation, the bars were too far back and were incomfortable
Mister B –
The bar look good but… The mounting holes are too small for my stock bolts.
Jason Sanchez –
Wires were easy enough to get through and it looks awesome.
Gabrielle –
Did not fit my 2014 superglide. Bars were dinged up and bent when I got them. Company was difficult to work with to get a replacement. I gave up and decided to keep them. They then tried to charge me money again for the “replacement bars” that I never received or even had shipped out