Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
3 Adjustable Height, maximum 28.7 inches, minimum 16.9 inches. You can get the height right where you want it.
For easy transportation, the black handle is glued to the pole, and it can be screwed in after receiving the goods
The thicker diameter makes the table legs have excellent stability and load-bearing capacity, and the load-bearing capacity can reach 100 lbs.
Material: Aluminum Alloy
Base Diameter: 177mm/7.0in
Desktop Board Diameter: 174mm/6.9in
Rod Diameter:60mm/2.4in, 72mm/2.8in, 85mm/3.3in
Instructions for use
• Raise: Unscrew the knob on the table pole, hold the lower tube with one hand, and pull the upper tube with the other hand, then tighten the knob after raising it.
• Lowering: Hold the upper tube with one hand, unscrew the knob on the table pole with the other hand, slowly lower the upper tube, lower the height, and then tighten the knob.
Wootieli –
Ok, this is much wider than I expected but that’s not a bad thing. It’s made of what feels and looks like aluminum maybe? The image shows a shiny metal but mine is textured which I like. The knobs are very large and easy to manipulate. I had one big issue with mine and nearly tore it up trying to fix it. When it arrived, it was apparent it had suffered a blow to the top tube during shipping with no padding. The top tube had been jammed into the bottom tube and would not telescope nor move at all. I tried nearly everything except winching it with my Jeep! See my seller review for that story! Finally I used a ratchet strap. I also had to bang the bottom tube several times against a padded concrete block. After all my attempts it finally gave up the fight and telescoped. It was hard at first but it seems to work fine now. It came with some large wood screws but I don’t know whether to trust these to hold this bad boy in place. Might have to use some thin bolts through the floor. But will try the screws first. I just got a job working remote and I’m a full timer in my RV so the table I’m making will serve as a desk. The bottom mount is thin enough I believe my slide floor will go right over this and not hit as long as I keep it off a roller. I haven’t made my table top yet but will this week and try to post a completed pic. This mount is beefy and it looks good too. Other than the issue with the stuck tube, I’m very satisfied with this pedestal. But for this price, it should maybe Bluetooth or something!😂
Hector –
This was my third attempt at making the dinette table more sturdy and less wobbly and it worked. My only mistake is I left it a quarter of an inch away from the wall so you can twist it just a hair so I’m gonna put like something to block. It doesn’t twist but works up and down. You will have to take the handles off completely takeoff the threaded bolt off the knob put Loctite on it and then re-thread the knob onto the bolt, because if not, it will come loose.
S. Vance –
The pedestal is very sturdy, is a good value for the money, and works perfectly in my RV. Totally solved the issue of converting my table into a base for our grandson’s bed with minimal effort. The manufacturer is very responsive to inquiries and I highly recommend them.
Mo –
The item is solid and well made. Exactly what it says. Adjusts up and down easily and feels sturdy. My only complaint would be that the tightening knobs can’t be adjusted to different rotated positions. Once tightened they are in the same position each time. My trailer is small and this adjustment would enable me to more easily access a storage area. This is unique to my configuration and may not be an issue for most folks.
Mihaela –
Me gusta
Jacques H. –
Très bon produit
NCosmany –
Well made but it did not fit our needs for our particular camper
Danny –
Installé dans un vanlife. Très satisfait
Douglas –
Seems to be very well made and solid with very very little movement. Very impressive and definitely with work for our purposes in the RV. I should have bought this first instead of the other brand that sold for $77.00. That was crap! I am very happy!
Kenneth L. Muldrew –
This table pedestal is very strong and provides excellent support for my rather heavy wood/epoxy table. The only issue is that the switch at the base (used to lock it into place so as to prevent rotation) is weak so it has a problem with catching and holding. Otherwise 5 stars.
Nombre –
La pata está muy bien.Era de segunda mano, pero casi nueva.La tuve que devolver, porque la tabla de la mesa era demasiado grande (120×80) para la pata.
Javier –
Me enviaron por error el producto equivocado, de un poco menos calidad, y para no perder la ventaja de precio por los días Prime aceptaron enviarme el correcto sin cambios, y yo les envié el equivocado.Tengo que decir que, habiendo visto los dos, este, el de tres piezas es más robusto y permite más margen de alturas. El otro no está mal tampoco, teniendo en cuenta que es bastante más barato.Muy contento con la compra 👍🏽
patrick mclaughlin –
This pedestal is the best!!! Tried the other types, less money etc. but this is built like a tank and barely wobbles. We tried four other brands and they were all terrible.If you want a strong stable pedestal….this is the best bang for the buck!