Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
| Manufacturer | HZAUTOS |
|---|---|
| Brand | HZAUTOS |
| Model | SXDLY#28 |
| Item Weight | 11.02 pounds |
| Product Dimensions | 20.49 x 16.53 x 4.14 inches |
| Item model number | SXDLY#28 |
| Manufacturer Part Number | SXDLY28 |
Product Description
HZAUTOS 28PCS Pressure Leak Tester Tool Kit
A full set of cooling system leakage test kit with functions of leak detection and temperature measurement, and with a pneumatic vacuum coolant refill kit
FEATURES:
1. Durability and good air tightness with strong construction
2. Universal applications with different sizes of adapters
3. Easy adapter selection in the separate position of case
4. 18” Rubber nylon material weave reinforced hose for good air tightness and anti corrosion
5. 3” Large dial for easy reading
Please refer to the detailed instruction for specific applicable vehicle models.
NOTE
1. Please wear gloves and goggles when use
2. This coolant pressure tester and refill kit should be used by professional or under the guidance of a professional
3. Always refer to equipment manufacturer’s operation instruction, compare to the manufacturer’s recommended readings
PACKAGE LIST
- 1* Hand pump with pressure gauge
- 17* Anodized aluminum cap adapters
- 3* Chromed steel cap adapters
- 1* pneumatic vacuum purging and feeding tool
- 1* thermometer
- 2* rubber hoses
- 1* universal tapered rubber adapter
- 2* connectors in yellow and white
PRODUCT SPOTLIGHTS
Radiator Hand Pump
The radiator hand pump is produced with good-quality aluminum and brass quick coupler, which is easy to connect to radiator adapters quickly. It is installed with a φ3″ pressure gauge, which shows the range of 0 – 35psi (0 – 2.5bar).
17pcs of Aluminum Radiator Tester Adapters
The 17pcs of radiator tester adapters are made of aluminum, all the adapters are distinguished by different colors and numbers marked on it, which is easy to be selected without any confusion.
3pcs of Stainless Steel Radiator Tester Adapters
The 3pcs of radiator tester adapters are made of stainless steel, all the adapters are distinguished by different shapes and numbers marked on it, which is easy to be selected without any confusion.
Pneumatic Vacuum Coolant Refill Tool
The coolant vacuum refill tool is installed with brass manifold body and brass fittings, which is durable and anti-corrosive. The 18″ rubber weave reinforced hose is featured with anti-corrosion, low fluid resistance, high bearing pressure, which is durable and can make good air sealing.
Jason –
This coolant service kit has many adaptors to use on all different types of cooling systems. Since many cars now have pressurized expansion bottles, this kit comes in handy for someone that works on a variety of vehicles. The hand pump works very well at pressurizing the cooling system to check for leaks. The pump holds the pressure until the pressure release valve is pressed. I recently used this kit to pressure test a new radiator that was installed and it worked extremely well. This kit saves a ton of time when the cooling system is opened up for service. I don’t have to worry about tracking down cooling system leaks after the system is filled and warmed up to operating temp. It keeps the expensive coolant from being wasted. The best way to use the vacuum coolant filler is to search online for videos.
T Tots –
I ordered this to use professionally and the main reason was the amount of adapters it comes with. I have both the red line comparables that this kit comes with.The amount of adapters is amazing it comes with enough to work on newer stuff and older alike, they all seal up good too.This kit also comes with a couple thermostat cap pressure testers there handy but I’ve not had a use for them yet.The pressure tester works okay it doesn’t have any leaks and the pressure release works as it should but will make a mess in certain situations. The largest issue I’ve had with the pressure tester is the needle gets stuck around the 15psi area and you have to tap or flick the gauge to get it correct.The coolant vacuum works good it’s a bit overcomplicated in its design it works very slow meaning it doesn’t pull coolant near as quickly which could be a good thing depending on the situation. I question if cutting the feed hose with the filter on the bottom would speed it up. In comparison per psi it doesn’t pull near as much vacuum as my red line unit but it’s never been an issue to the point it didn’t fill the system.I think all in all for what your getting here it’s an excellent buy I spend upwards of 70$ for one extra red line adapter off the Matco truck. This kit is well constructed and will cover most applications..
yormar ragazzoni –
No me agrado, porqué es de plasticos
Brian Weber –
Fits and works on all my cars
Daniel p. –
Good for the money
The Eider Geek –
Good set