Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
AKKON’s mission is to bring the best quality automotive parts and accessories to our customers. With excellent service, rigorous research and development, our team provides pure passion for the automotive industry allowing us to supply our customers with the best online shopping experience possible. With thousands of products in stock in our warehouse, we have OEM style direct replacements and customized aftermarket upgrade lightning options available.
This is a 100% brand new pair of Headlights Replacement Assemblies in Midnight Black Housing with Smoke Lens
Compatible With:
- 2012-2016 Subaru Impreza
- 2013-2014 Subaru XV Crosstrek
Projector Headlights
Built to last high quality constructed projector headlights not only upgrade your lovely car to next level but also increase the brightness and functionality.
Projector Headlights are proven to give off a more even light increasing the visibility towards your destination while being less likely to blind other drivers at the same time.
We test fit every product to ensure our designs are 100% compatible with your cars OEM fitment and function while maintaining bolt-on direct replacement.
Quality Make Lens
Projector Lenses give you the maximum light output and increased viability at night. Our lenses are optically clear to maximize the visible light transmission. It acts as a magnifying glass, enriching the brightness and direction of the light beam.
Projector Parts
The source of the light is concentrated inside the reflective housing and then focused through the projector lens, the same idea as using a magnifying glass in the sun to start a fire, except the desired effect of this is to focus a razor sharp beam of light outward.
LED Chips
Vehicles with illuminated LED chips have many advantages. When compared to standard incandescent bulbs, LED’s last longer and light up quicker which increases safety on the road.
LED Tube Design
LED tube designs consist of rows of LED’s under an opaque shield. When illuminated, solid even light shows through illuminating a separate light pattern than an exposed LED chip while remaining just as effective.
![ACANII - For [Halogen Model] 2018-2020 Ford F150 Black Smoked Switchback Signal LED Tube Projector Headlights Headlamps, Cyber Black](https://imaginebroward.org/images/imagesall/images_0/images/I/610/61-EvYuv+dL._AC_SL500_.jpg)
Xv boondocker –
The media could not be loaded.
Matt S. –
These headlights were pretty much exactly what I was looking for. Installation is a breeze if you’re even somewhat savvy with car stuff, just had to pull some trim clips, remove the bumper and old headlights, hook up the wiring, and then put everything back together. Only tools required were a 10mm socket and trim clip pry bar. Aiming them was also pretty simple, just need a philips bit in a 1/4″ socket wrench and you’re good-to-go.To have the C-lights be the only DRLs, there is a resistor you have to unplug, perhaps that’s one issue people have been running into with these (not unplugging resistor means that the projectors will also be turned on with the DRLs). Also, make sure to aim them properly otherwise you won’t see much of a difference when trying to use the high beams.Other than that, these headlights were simple to figure out, look mean AF, and provide at least as much visibility as the stock headlights if you replace the bulbs with decent LEDs and aim them properly (can’t speak for the smoked lenses as they’re illegal where I live). I would definitely recommend these headlights!
Don’t drink and Prime –
Installed these on my 2016 Crosstrek. They look amazing! Installed without a problem. The fitment is flush. They pair very well with gtr ultra 2 led headlights.things to note:- if you upgraded your stock headlights to LEDs, the hi-beam will not fit with these headlights. That headlight is a 9005/H10 bulb. The low beam is an H11, which will fit perfectly fine with these headlights.- on these lights the low beam is also the hi beam.- you may need to purchase dust covers if you’re using leds, as the screw on covers may not fit.- some people claim to have blown a fuse right away when switching to the hi-beams. This is supposedly cause by some improper wiring. To avoid this, there is a red wire that has a quick disconnect seal you can undo. This needs to be done on both headlights. I did that on my headlights and can confirm no blown fuse, normal lights still work, and high beams still work just fine.- highly suggest replacing turn signal bulbs with a high power led one. There is no reflector, and standard led bulbs aren’t visible enough during the day. I suggest bulbs like vled extreme v6 OR gtr i-led ultras. Either brand sells switchbacks, and look really good when you enable them as DRLs. Asides aesthetics, it’s a good safety upgrade.- you can enable the c-lights as DRLs vs the main headlight with some wiretapping/modifications. Creates a more “modern” look.Update 8/7/24Still going strong, and haven’t noticed any peeling/hazing of the headlights.
Colton S. –
Came packaged very nicely is a big box! After further inspection I realized that the clear coat sprayed on was bubbling at the top edge and flaked off after I touch it. The day time running lights had the connectors ripped out of them and I had to reattach.
Brian –
If you’re looking for some headlights for your car/truck this is the company to use . The product is spot on and the customer service is vary nice to work with. Thumbs up for this company
TNS –
Just had these installed, they look great!!!!
Above average consumer –
They work for crosstrek no problem,,you need a small amount of technical ability and tools the bumper /grill must be removed for replacement,,add to your order some new plastic body retainer clips and faster removal tool to ensure an easy dependable swap,,
leeis –
They did an excellent job packaging these to protect them from damage. These are plug and play. People on the Subaru XV forums reported blowing a fuse when switching on the brights. There is a connector running from the headlight housing with a red and black wire (positive and negative). Separate the quick connect on the red wire only and seal the ends with something to protect it from water. I used electrical tape. Leave the black wire connected. Plug in the connector. This will fix the problem with the fuse blowing and you will retain use of the low and high beams.These are BRIGHT. I wouldn’t run LED bulbs in them. My low beams are brighter than my friend’s brights (stock Xterra with halogens).