Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
Introduction of TPMS Relearn Tool TPMS Reset Tool for Ford
This Waterpoof TPMS Relearn Tool is specific for Ford vehicles equipped with 315 or 433 MHz Tire Pressure Monitoring system (TPMS). With this tool, you can activate the tire sensor or remove the TMPS warning lamp by yourself instead of going to the dealership or a mechanic. It is very easy, only some steps, with a few minutes, you can finish it. It saves your time and money. Even you don’t have professional car maintenance knowledge and skills, even you are green hand or woman, it is easy and simple for you to use this TPMS relearn tool TPMS reset tool for Ford.
This TPMS relearn tool TPMS reset tool is specially designed for Ford cars, SUVs, light trucks and pickups. So this tool can be compatible well. Not for heavy trucks and vehicles with more than 4 tires.
It is also compact and portable so it is easy to carry with you in your car or toolbox. You can use it anytime, anywhere, without having to worry about bulky equipment or complicated setups.
For F150 F250 F350 F450 F550 Mustang Edge Escape Expedition Explorer Flex Taurus E150 E250 E350 E450 Fiesta Focus Fusion Ranger Transit etc.
What can this TPMS relearn tool do?
1. Activate tire sensors;
2. Make the dashboard display tire pressure;
3. Clear TPMS warning light;
4. Test tire sensors (If the sensor can t be activated, it is bad).
When do you need this TPMS relearn tool TPMS reset too for Ford?
1. After tire rotation, replacement, maintance and exchanging;
2. After tire sensor replacement, maintace;
3. After replacing Remote Control Door Lock Receiver Module;
4. The TPMS warning lamp is on, after the maintance, you would use this tool to remove it;
5. Due to some problems, the tire sensor can’t be recognized, you can use this tool to try to activate it. If can’t, you would buy a new tire sensor.
How to use this TPMS relearn tool TPMS reset tool for Ford?
Step 1- Enter relearn mode
1. Plug the key, step on the parking brake, the car keys from the OFF to ON 3 times, and then step on the parking brake, turn off the car keys, and then from the OFF to ON three times;
2. Training mode for the vehicle to start the state of the three consecutive dangerous alarm), if you hear the speaker sounded that the training mode has been enabled;
3. Different car brands or models may have differernt setting. If this can’t enter the relearn mode, please read your car manual or consult a mechanic.
Step 2- Activate 1st tire sensor
1. Start from the front left wheel.
2. The antenna would be placed at the sidewall of tire where aligns with the valve stem.
3. Press the Resetting button(with white dot) to activate the tire sonsor.
4. The activation is successful when the horn bleeps. Then do the next tire.
Step 3- Same method to activate other tire sensors
1. Follow the instruction step#2 to activate tire sensor of the front right, rear right, rear left tires.
2. Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.
Special reminding:
1. Make sure all tires’ pressure are in accord with the driver’s door placard suggested.
2. Your car should be in TPMS learning status.
3. Resetting order of tires: front left ->front right -> rear right -> rear left.
4. Antenna of tool should aim at the tire sidewall where is close to the valve stem.
5. Beep sound means resetting successfully.
6. When resetting, other wireless devices would be turned off which many cause RF disruption.
7. Tire pressure sensors would be original. Non-original sensors may be failure because its configuration may be wrong.
How to replace the battery?
The battery is sealed by glue taple to enhance the water resistance.
Prepare: a new CR2030 cell batter, a solder gun, some solder wire, and some tape
Step 1: open the tool cover and take out the battery. Please remember where the red and black wires are soldered. You can take a photo or make a mark first.
Step 2: Use a solder gun to melt the solder joints on the battery, remove the battery
Step 3: Replace the battery with a new one, re-solder the wires to the battery
Step 4: Apply tape, stick the round sticker, and re-install the battery and cover
***** QA *****
1. Is this tool easy to use?
Yes, it is very easy. You just need to press one button to activate tires’ sensor one by one.
2. Why does it not work for my car?
Your car brand, model and year is not in the Compatibility List.
3. Why does it not work for my truck?
This TPMS tool doesn’t support truck. It is only for cars, SUVs, pickups and light trucks of Ford not for heavy trucks.
4. Why didn’t this tool work?
Did you buy the wrong tool? This tool is for cars, SUVs, pickups and light trucks of Ford. And is your car model and year in the Compatibility List? This tool is not for heavy trucks.
5. Why didn’t this tool work for my vehicle which is in the Compatibility List?
Besides above reason, the most possible reason is that the TPMS sensor you bought has problems. You bought non-original sensor and which is not programmed correctly, and even it is a blank sensor that has not been programmed. That is why we recommend to buy original sensors. If not original sensors, we are not sure that it will work.
6. Why didn’t this tool work for my vehicle which is in the Compatibility List and my sensor is original?
Besides above reason, the most possible reason is your sensor. Was it a new original sensor? If it was a new original sensor, you must buy a wrong one. If it was an old sensor, there must be some problems with this sensor, such as low power or no power, damaged, car TPMS system has a problem, etc.
7. What to do if one of sensors can’t be activated?
You can skip this tire and try other tires, if you can hear the horn or see the turn light flashing, it means other sensors can be reset, also means that sensor has a problem. If that sensor is no problem, please send us message about your problems from the order page so we can check reasons
8. How to make the vehicle into TPMS relearn mode?
Please check it on paper manual. And some cars may be different. You can check it on your car manual or ask a mechanic.
9. Why may non-original sensors fail?
Because non-original sensors may be programmed incorrectly, even blank. If the parameters are not consistent with the original ones or the frequency is changed, they cannot be activated.
CG –
Purchased to save money for my 2013 f150 and 2019 expedition. TPMS is electronic and goes out and has bugs just as any electronic does. This is a simple TPMS relearn tool that can assist if the sensors need to be reset.We had an experience where the expedition had new tires installed, the installer didn’t have the relearn software or equipment to fix the issue of the TPMS failure on reinstall. We had to go to dealer and have the system reset. After seeing this tool, I’m hoping that shouldn’t happen again. Haven’t had to try it yet, I’ll have it if I need it and hopefully it works as designed and advertised.
Jayson –
This TMPS relearn tool has finally rid me of the TPMS error I have been dealing with for months. I had a sensor go bad, presumably from a dead battery since the car is 11 years old (2013 Ford Fusion). I ordered sensors from Amazon and had them replaced last month when I got new tires put on, but still got the error. This tool is simple to use and comes with easy to follow instructions. Just had to put the car into learn mode and go to each tire and press the button on the tool. Now I finally have no more error lights and will actually know there is a problem if one occurs. It also comes with a battery included (a CR2032 coin cell) so it is ready to use as soon as it is received.
Lorraine Skipwith –
I don’t know if it’s me or what but none of the tire pressure reset tools I get online doesn’t work for my Ford Explorer. I really thought this would work since the reviews were pretty good but just not working for me.
Nick Mathews –
I upgraded my truck tires to a more off road look and they kept tripping the low pressure warning on my dashboard. I couldn’t figure out what was going on and checked the forums. I found that when you get bigger (or smaller) tires that you need to reprogram the TPS on your vehicle.This product comes with instructions that walk you through the process. Being my first time it did take me 3 tries before I finally got it right. It is hard to get the right progression of key turns and brake presses to get the computer to go into “troubleshooting” mode or whatever it is called.I have not had my TPS light come back on sine using it.
Will –
Just the tool you need for swapping between summer and winter tires. If you have a complete second set of wheels for your snow tires then this is what you need for a complete DIY swap in the spring and fall. No more trips to the tire store for reprogramming.Cycling the ignition with a push button start can be a bit tricky but does still work. Note that older models, like my 2014 Flex, require two presses of the start button to go to “ignition on” mode. A single press goes to a partial accessory mode and is not correct for entering programming mode. The trick is to press twice for “ignition”, then press once for “off”. Repeat this 2/1 cycle as directed by the instructions to enter programming mode. It took me a few tries to get the timing right.
J. Dahl –
It did not even work on one tire, returned it immediately and bought a similar item that did work.
Nathaniel –
came in and put car in learn mode and it doesn’t work
Danno –
The media could not be loaded.