Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
- Install the External Machine: Remove the casing, mark the drilling position, use an 8mm drill to drill holes, use a riveting tool to fix the rivet nut at the drilling point, install shock pads and sleeves at the holes of the external machine, and fix the external machine to the car .
- Install the Expansion Valve: Remove the iron sheet at the position of the expansion valve of the evaporator, and fix the expansion valve to the evaporator. The two black screws correspond to the two holes, so there is no need to worry about wrong installation.Then wrap it in black cotton wrap.
- Install the Indoor Unit: First install the wooden board to the indoor wall, and then install the evaporator on the wooden board.
- Install High & Low Pressure Pipelines: First open a (50mm) hole in the car, and then install the rubber cover with three holes. The thick pipe is the low pressure pipe and is connected to the compressor. The thin tube is a high pressure tube and is connected to the condenser. Then connect the other end of the high and low pressure pipes to the holes corresponding to the expansion valve of the indoor unit, use long black screws and iron sheets to clamp the aluminum joints, and tighten the screws.
- Install the Connection Line: Connect the connection lines of the internal and external units, plug the power cord plugs into each other, and connect the drain pipe of the evaporator.
- Vacuuming/Adding Refrigerant: It needs to be vacuumed for 15-20 minutes, and then add refrigerant R134a/600g. The refrigerant can be added according to the pressure value. Generally, after the R134a refrigerant is injected into the air conditioning system, the pressure at the low pressure port is 35psi, and the pressure at the high pressure port is 140-180psi.
- Connect the Power Cord to the Battery: Connect the power cord to the battery, pay attention to the positive and negative poles of the battery, avoid connecting them conversely, + positive / – negative. It is forbidden to connect it to the power-off switch and the power switch.
- Test to see if it works: Start the Air Conditioner to see if it works. If the current is insufficient, the refrigerant is too much or not enough, the control panel will display a code, which can quickly troubleshoot.
Alyshea –
Compared to other models, this one is quite affordable due to its aluminum evaporator. Despite the lower cost, it doesnโt compromise on performance. It provides efficient cooling and saves me money without sacrificing quality.