Skip to content
Clear product details Fitment guidance Contact support
ExactFit Parts Specs and fitment made clearer.
My account Cart 0
Water Tank Level 125T YWZ 125T, Oil Lubricating Sensor Meter with Temperature Display 0.1 to 0.15MPa, for Oil Tank, Cooling Box, Gear Transmisison Box

Water Tank Level 125T YWZ 125T, Oil Lubricating Sensor Meter with Temperature Display 0.1 to 0.15MPa, for Oil Tank, Cooling Box, Gear Transmisison Box | Specifications and Fitment

$16.39

SKU: B-B0DQ37NS1H Category:

Use the specifications, images, available variations, fitment notes, and referenced part numbers to check this product against your application.

About this item

  • MAIN PURPOSE: This level is an essential tool of oil tank, lubricating device, cooling box and gear transmission box, applicable to mineral oil, water in oil and other media.
  • CLEAR DISPLAY: The liquid level has reasonable structure, clearly shows the liquid level and temperature, accurate in measuring, improving the efficiency.
  • SELF SEALING VALVE: The level is equipped with self sealing valve. to replace or repair, just unscrew the screw, the self sealing valve will close and cut off the oil circuit.
  • WORKING RANGE: The pressure range of the water level is 0.1-0.15MPa, and the temperature display range is -20-100℃, which can meet more use needs.
  • TIGHT STRUCTURE: With fine workmanship, the water level has a compact structure, strong and shockproof, no liquid and oil leakage.

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.

Description

Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.

Specification:
Item Type: Liquid Level Meter
Product Model: YWZ 125T
Temperature: -20-100℃
Pressure: 0.1-0.15MPa

How to Use:
Installation Method:
Select the specification and size of the level as required, and machine 2 mounting holes on the side plate of the oil tank as required. For example, when the wall thickness of the oil tank is less than or equal to 10mm, the 2 installation light holes are 11mm in the middle; If the wall thickness of the oil tank is greater than 10mm, the 2 mounting screw holes are M10; if the self‑sealing valve is selected, the 2 mounting light holes are 19mm. The machining tolerance of the center distance between the 2 mounting holes on the oil tank is required to be ± 0.2mm, and the plane of the mounting holes should be straight to prevent oil leakage after installation. When installing the level screw, the tightening force should be moderate, and it is appropriate to seal properly without oil leakage to avoid damaging the level gauge.

Package List:
1 x Liquid Level Meter

Product facts

Specifications

Canonical product
MP-US-B0DQ37NS1H
Source product ID
B0DQ37NS1H
Category
Replacement Parts / Sensors / Oil Level
Available images
8

No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.

Parameters, dimensions, material, fitment, and part numbers

Buying guidance

Quick decision

A oil level listing with source specifications kept visible for comparison.

Fit and size notes

  • No structured vehicle fitment was supplied; verify the product details against your application.

Before you buy

  • Compare the listing title, photos, package contents, and specifications with the part being replaced.
  • Confirm vehicle compatibility and installation requirements before ordering.

Customer feedback

Ratings and written reviews

Reviews below were submitted through this store.

Reviews

There are no reviews yet.

Be the first to review “Water Tank Level 125T YWZ 125T, Oil Lubricating Sensor Meter with Temperature Display 0.1 to 0.15MPa, for Oil Tank, Cooling Box, Gear Transmisison Box | Specifications and Fitment”

Your email address will not be published. Required fields are marked *

Related products