Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
BESTOOL Rear Axle Shaft Bearing Puller
Toyota Truck Axle Bearings are very difficult to remove and replace because the backing plate interferes with pressing! This tool simplifies a nearly hard task to the point where even a girl can perform it!
Works on Multiple Applications:
- Toyota Pickups (Hilux) 1975 – 1995
- Toyota 4 Runners 1984 – 2013/Tacoma 1995 – 2016
- Toyota Tundra 2000 – 2016/Sequoia 2001 – 2008
- Toyota FJ Cruiser 2007 – 2013
- Toyota Lexus GX (460) 2010 – 2013/(470) 2003 – 2009
- Toyota Pre Runner 2005 – 2013/Land Cruiser 1998 – 2008
Vehicle information
Available fitment details
Listing compatibility notes
- 【Strong Compatibility】Fits a wide range of Toyota models including Pickups (Hilux) 1975-1995, 4Runners 1984-2013, Tacomas 1995-2016, Tundras 2000-2016, Sequoias 2001-2008, FJ Cruisers 2007-2013, GX (460) 2010-2013, GX (470) 2003-2009, Pre Runners 2005-2013, and Land Cruisers 1998-2008.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A bearing pullers listing with source specifications kept visible for comparison.
Fit and size notes
- 【Strong Compatibility】Fits a wide range of Toyota models including Pickups (Hilux) 1975-1995, 4Runners 1984-2013, Tacomas 1995-2016, Tundras 2000-2016, Sequoias 2001-2008, FJ Cruisers 2007-2013, GX (460) 2010-2013, GX (470) 2003-2009, Pre Runners 2005-2013, and Land Cruisers 1998-2008.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.7 / 5
29 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Rob williams –
Worked like a charm. But for the bottom of the bearing you will need a bearing seporator, lag bolts to thread up the puller also.
David Cochran –
Tool is great quality and works perfectly
robauto –
Replacing of the bearing was a piece of cake with this tool. Well made.
Ozzie –
Tool worked great
Jacob –
I purchased this bazooka (it looks like one) to get the hub assembly off the axles of a 2007 Tundra. Worked flawlessly to pull both hubs off. You will need a bearing separator to complete the job. I borrowed the separator at Auto Zone. Only hick up was with my press. I had to modify it so that I can use the bazooka.My original plan was to have a shop do this for me. They started mentioning cutting and heating up the axle to remove the hub, and guesstimated about 2 hours of Labor. For two axles that would have been 4 hours and a cost of about $500 so I opted to buy this bazooka and do it myself. It took all day but feel I saved way more money doing it myself.
NPC –
good price.Received on date specified.Tool worked as needed.Cannot ask for more.
Thalia –
Lo use en una Tyota secoia
Ty –
After owning several body on frame Toyotas. Many of you know replacing the rear wheel bearings on these trucks and SUV is a big chore especially if you don’t have the right tool.This tool will work on most if not all Toyota solid axles vehicles. The bolt holes lines up perfectly on the 4-Runner and up to the 3rd Gen Tundra.So far so good and the tool held up just fine under a 20 ton press. Having the right tool helps tremendously and will save you money on the long run especially if you like to do things yourself.No issues with the rear axle tool.