Original price was: $399.99.$345.31Current price is: $345.31.
330 ratingsSource: AmazonUse the specifications, images, available variations, fitment notes, and referenced part numbers to check this product against your application.
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product facts
Vehicle information
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Customer feedback
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Captain1010 –
First off let me say that I have gone through 4 soft ATV bags and one large hard box. If your sick of ripped straps on soft bags and using bungee cords to keep it attached or do not want an over sized cargo box or one with a seat built in then this box is the perfect size for you as well. I have a 2015 King Quad 750 and it really fits great. This product is the perfect size and allows you to take the seat on an off without removing the box. My old hard box was so large I could not take the seat off once it was installed and got rid of it after a week riding Hatfield & McCoy trials. I have not ridden with this yet so I cannot speak about how it does in the dust or rain but it seems high quality and has weather stripping around the inside.
Customer –
Really nice box, good latches – I think it would hold up well even with aggressive riding. I wish I could have kept it, but I had to return it , it was just too big to fit on my mid-size Suzuki Vinson 500. maybe would fit well on the back of a larger size atv.
James P. Lambert –
Here’s the box mounted on a 2017 Honda 500 Foreman. It appears to be well made, with nice mounting hardware. I did wrap the bottom of the U bolt with a few wraps of electrical tape, to prevent wearing the paint off. I’ll update after using it for a few months. Very impressed with the shape, size, and locksUpdate…still in love with it, although the locks seems a bit fragile
JE D. –
Bought this to go on the back of my Arctic Cat TRV (2 rider vehicle) perfect size for the application I bought it for. While waiting to get the rear mounting rack for the bike i installed it up front.Box is good and sturdy with thick plastic. the kit comes with everything you need to mount up to a rack, all you need are a drill, bit and ratchet set or wrench – comes with instructions for those that need it.The only problems I encountered were the U-bolts are almost to small for my heavy duty oversized rack, but did the job. The second incident was a quick fix. After I installed the box the lid was not closing properly, so i backed off the u-bolts about a quarter turn – problem solved.Been two weeks now here in the Arctic with around -20 to -40 weather and doing good
A. Wilson –
I just got this product yesterday and I’ve mounted it on the back of a 2022 Honda Rubicon; mounting it backwards (hinge is at the back of my rig) so that the indent intended for handle bar clearance now serves for rider back clearance if you need to lean back on a steep descent. It appears to be a quality product, though as many have noted the latches seem a bit cheap. The plastic doesn’t appear to be super thick (guessing about 1/8″) but overall the box appears sturdy. Plus the fact that this box is $200, where a Honda box would be $600 and a Kimpex box would be $350, adds to the appeal.I took a different approach to mounting it which may be of interest to Honda owners whose ATVs have the racks designed for Honda Pro-Connect accessories (these are the flat metal plates with some square holes in them). If mounting on the back rack the base of the box will cover 4 of these square holes so you can utilize these holes for mounting. Here’s how. First, mark the outside edges of the rack, side to side and front to back to show where the centres of the holes are; i put painters tape on the rack edges and used a sharpie. Next, decide where you want the box to be positioned (positioning it so that the back edge lines up with the back bar works best) and mark the sides/back of the box to line up with the marks you made on the rack in step one (I used a white car tire crayon). Next flip the box over and draw lines side to side and front to back (using a L/T square and/or large straight edge helps here ). Now at the 4 points where the lines cross you can drill your holes in the bottom of the box.On the underside of the rack I decided to use smallish rectangular blocks of high quality 3/4 inch plywood (because i had it) that I had drilled and then hammered T-bolts into one side. But you could also use hardwood blocks or metal plates; i think the nice thing about wood is that it’s got greater mounting friction and won’t scratch the paint.So to put it all together, get some really big washers to go on the inside of the box to distribute the force of the bolt, then drop the bolts through and loosely attach your wood blocks from underneath. Now the nice thing about this is that you don’t have to be absolutely perfect with your drilling, because the square holes and the wooden blocks which are bigger than the holes, give you some leeway to fine tune the position of the box on the rack before you tighten everything up.Overall this gives a cleaner look on the inside, because you don’t have the U-bolt ends sticking up inside the box. BUT one thing to note is that with this approach the bolt pattern is not quite as broadly distributed as the ideal positioning shown in the mfr’s instructions. I don’t see this as a problem for me, but you have to make you’re own call.
Nestor Gonzalez Sosa –
El único detalle que tiene es su cerradura con llave.DE BAJA CALIDAD, si haces presión fácil podrías botar el seguro aunque este con llave, así que no es para confiar en lo que dejas dentro.Fuera de eso, todo queda bien
Maro –
The video on the product page showed a guy snaking his hand under the box to mark where to drill the holes in about two seconds. This does not happen. Neither my hand nor my husband’s hand fit under there. Husband marked the outside edge of the box where the bars were and used a straight edge to connect and show where they were. Once on, however, this is a good box, roomy, and most importantly, keeps my stuff dry. I agree with the others that the clasps seem flimsy but so far, so good. I have opened and shut them several times a day for over a month with no problem. I have a Yamaha Kodiak 450.
MP –
Very sturdy, I stalked it on my back rack with the supplied hardware and I stalled 2 gun racks. Works well for hunting
Wolfmaan –
Purchased this for my 2009 Honda Rancher 420ATV. Fits very well with 1/2inch clearance on each side. Feels well built. Lots of interior space. Only thing that hurt was drilling holes in the clean and beautiful box to mount it. 4 U-bolts are included and it’s as easy as pushing the U-bolts from underneath and scratching the box for spacing, and then drilling the holes, and screwing everything into place. It took less than 1/2hr to install it. I went out for a rip and it stayed solid. A great, sleek box that looks good and works well.
Karleton Short –
I purchased one several years ago. It has been the first unit that has always kept everything dry all of the time. I live in a very wet, rainy, place. It is also very convenient to use.I liked it enough that when I purchased another ATV I also purchased this box again.
Customer –
This box is well built and can fit almost any rack on an atv. I mounted it to a 2024 Honda rancher, I added another u bolt just to be safe. Would be 5 star but like others have said the patches/locks work but are notvery secure. Any pocket knife would easily pop it open and for me who hunts and leaves my atv for days unattended in the woods for days it’s a problem. I drilled and put a stronger lock on it. Would be a simple fix for company to make differently but I get it. Otherwise box is think and well made. Bottom where bolts go could be a little thicker but I’m nit picking.
RAYMOND YOCUPICIO –
Fast shipping and fits perfect. Fully Satisfied with this product
Finish Carpenter –
Great Product