Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
For use with 1/4” ID hose and a 1/4″ NPT Bung. Can be used with GAS and GASONOL! Perfect for custom aftermarket tanks with 1/4″ NPT Bungs… Listing is for ONE (1) Filtered Petcock constructed of high grade Brass and Steel with a 90 Degree Hose Barb. Petcocks come chrome plated to look good for years to come. Works with custom tanks that feature a female 1/4″ NPT Petcock Bung. Male 1/4″ NPT thread. 1/4″ barb accepts 1/4″ ID hose (Also available). “R” (Reserve), “ON” and “OFF” just like OEM. Designed to be used without O-Rings which typically dry up and leak over time. The built-in filter allows for extra protection against debris entering your fuel system while still providing maximum flow. Please make sure that you have at least 2-3/8″ from the bottom of the petcock bung and the nearest obstruction in your tank (Baffles etc). We also offer these Petcocks with STRAIGHT hose fittings. Dimensions: Overall Length = 3-3/4″ “Face” Width = 2-1/8″ Depth = 1-1/2″ Thread = Male 1/4″ NPT The Length from the bottom of the threads to the top of the filter is 2-3/8″ (Please check to make sure that this will fit in your tank.) Finish: Chrome Plated Accommodates: Works with custom aftermarket tanks with a 1/4″ NPT Bung and clearance for the filter inside the tank. A fuel hose with a 1/4″ ID.
Vehicle information
Available fitment details
Listing compatibility notes
- 90 Degree Hose Barb - We also offer this petcock with a Straight hose fitting.
- We also offer these Petcocks with STRAIGHT hose fittings.
- Dimensions: Overall Length = 3-3/4" "Face" Width = 2-1/8" Depth = 1-1/2" Thread = Male 1/4" NPT The Length from the bottom of the threads to the top of the filter is 2-3/8" (Please check to make sure that this will fit in your tank.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A fasteners listing with source specifications kept visible for comparison.
Fit and size notes
- 90 Degree Hose Barb - We also offer this petcock with a Straight hose fitting.
- We also offer these Petcocks with STRAIGHT hose fittings.
- Dimensions: Overall Length = 3-3/4" "Face" Width = 2-1/8" Depth = 1-1/2" Thread = Male 1/4" NPT The Length from the bottom of the threads to the top of the filter is 2-3/8" (Please check to make sure that this will fit in your tank.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
3.9 / 5
74 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
K Bulkley –
Stuff husband buys for motorcycle keeps him happy in garage.
Doug Lucas –
I needed this fuel shut off valve for my home made log splitter. worked perfectly
John C –
it was straight pipe thread which is not tapered and will not screw into a npt female fitting. I had npt dies and rethreaded it so it would work.
Schaun Schnathorst –
The filter is larger than the NPT opening in the tank; therefore, the options are to not use it or use it without the filter. Time was a factor so we had to go no filter… I do not recommend that! We tried shaving the plastic down on the filter but it just wouldn’t fit in the hole!
Michael –
Looks and works perfect
Eric J. –
Very nice looking and easy to use . Great service .
Marcel Ioan Nistor –
This was installed on my motorcycle only 2 weeks ago and already needs a rebuild kit as it leaks a drop every few minutes making a flammable mess of my engine! Very disappointed!
James Faggart –
Works as intended with no leaks so far.