Skip to content
Clear product details Fitment guidance Contact support
ExactFit Parts Specs and fitment made clearer.

Chevy Spindle Flat Tie Rod Steering Arms, Plain Finish | Specifications and Fitment

$50.99

SKU: B-B01N26JCCD Category:

Use the specifications, images, available variations, fitment notes, and referenced part numbers to check this product against your application.

  • These steering arms fit 1949 to 1954 Chevy spindles
  • Traditional style steering arms with a single tie rod hole in each arm
  • Must be used with 5/8″ hole size spherical rod end – tapered tie rod ends are not compatible
  • Uses a 46″ eye to eye tie rod when used with a 48″ wide axle
  • Zinc plated for corrosion resistance

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.

Description

Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.

For 1949-54 Compatible with Chevy passenger car spindles. The arms attach with bolts through the lower 2 backing plate mounting holes (3-1/8″ center-to-center) on spindle. The distance between the mounting holes to the center of the tie rod hole is 6 inches. Note: Compatible with Chevy arms use a 46″ eye to eye tie rod link when used with a 48″ wide axle / Compatible with Chevy spindle.

Product facts

Specifications

Canonical product
MP-US-B01N26JCCD
Source product ID
B01N26JCCD
Category
Replacement Parts / Shocks, Struts & Suspension / Chassis / Steering Arms
Available images
5

Vehicle information

Available fitment details

Listing compatibility notes

  • These steering arms fit 1949 to 1954 Chevy spindles Traditional style steering arms with a single tie rod hole in each arm Must be used with 5/8" hole size spherical rod end - tapered tie rod ends are not compatible Uses a 46" eye to eye tie rod when used with a 48" wide axle Zinc plated for corrosion resistance For 1949-54 Compatible with Chevy passenger car spindles.
  • Note: Compatible with Chevy arms use a 46" eye to eye tie rod link when used with a 48" wide axle / Compatible with Chevy spindle.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Parameters, dimensions, material, fitment, and part numbers

Buying guidance

Quick decision

A steering arms listing with source specifications kept visible for comparison.

Fit and size notes

  • These steering arms fit 1949 to 1954 Chevy spindles Traditional style steering arms with a single tie rod hole in each arm Must be used with 5/8" hole size spherical rod end - tapered tie rod ends are not compatible Uses a 46" eye to eye tie rod when used with a 48" wide axle Zinc plated for corrosion resistance For 1949-54 Compatible with Chevy passenger car spindles.
  • Note: Compatible with Chevy arms use a 46" eye to eye tie rod link when used with a 48" wide axle / Compatible with Chevy spindle.

Before you buy

  • Compare the listing title, photos, package contents, and specifications with the part being replaced.
  • Confirm vehicle compatibility and installation requirements before ordering.

Customer feedback

Ratings and written reviews

Reviews below were submitted through this store.

Reviews

There are no reviews yet.

Be the first to review “Chevy Spindle Flat Tie Rod Steering Arms, Plain Finish | Specifications and Fitment”

Your email address will not be published. Required fields are marked *