Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
Operating Instruction
1. Power on the vehicle, but do not start the engine
2. Use the up and down keys on the steering wheel to adjust the instrument panel display to the audio interface
3. Long press the left button on the steering wheel and press the CANC button at the same time to see if the module menu appears on the screen
4. If a menu appears, configure it according to the instructions. If there is no menu, check if the car gateway fuse is burned out
CRITICAL ! ! !
Every single time you make changes in the “vehicle settings” (engine off) menu or unmarry, you must perform a full reboot and two sleep cycles. Please follow the instructions carefully to perform a full reboot and two sleep cycles
Wesley –
Some things it worked for, like letting me set tire size but a few things were glitchy. I know this is cheaper than the brand name item so I assumed it might not be as nice, but still expected it to work for the menu options it hasFlashing 3rd brake light has issue where you can’t change number of flashes. Line lock stops work about 2 seconds after you apply the gas.
Customer –
I just want to confirm to potential buyers this product works as intended on a JEEP Wrangler Rubicon 2020. I do not believe it has the PIN code option the original Tazer mini JL has, for those who want to secure your car having to enter a button key combination on the steering wheel to be able to drive away (you are also not able to update the firmware on this unit).TIP: Once you succeed to install it it, you can do whatever changes you need BUT you will have to do two full reboots (as explained in the manual) for it to be fully accepted by the CAN bus system. If you don’t a big red dot will shine on the tachometer panel. What is IMPORTANT to know is that, once you start the reboot sequence it will countdown to 0, but it will do so at least 2 times before doing the full reboot (the first countdown longer than the second). So do not think it has done a reboot after the first count, be patient. If you do it correctly the light will stop shining 🙂