Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
| Brand | 3M |
|---|---|
| Color | Clear |
| Finish Type | Eggshell |
| Size | 1 Count (Pack of 1) |
| Item Volume | 22 Fluid Ounces |
| Special Feature | Washable |
| Unit Count | 1.0 Count |
| Paint Type | Spray |
| Specific Uses For Product | Interior/Exterior |
| Surface Recommendation | Walls, Floors |
| Indoor/Outdoor Usage | Indoor |
| Item Form | Liquid |
| Included Components | PPS Standard Size Kit with 200 Micron Filters |
| Age Range (Description) | Adult |
| Is Waterproof | False |
| Model Name | 3M PPS (Original Series) Paint Spray Gun Cup Lids and Liners Kit, 16000, Standard, 22 oz, 200-micron Filter |
| Package Information | Cup |
| Color Code | FFFFFF |
| Full Cure Time | 24 Hours |
| Coverage | Approximately 2359.5 square feet |
| Water Resistance Level | Not Water Resistant |
| UPC | 051131160002 |
| Global Trade Identification Number | 00051131160002 |
| Manufacturer | 3M |
| Dry Time In Hours | 24 |
| Item Weight | 4.42 pounds |
| Product Dimensions | 15.13 x 14 x 14 inches |
| Item model number | 16000 |
| Is Discontinued By Manufacturer | No |
| Exterior | Polished |
| Manufacturer Part Number | 16000 |
| Special Features | Washable |
| Lift Type | …… |
| National Stock Number | 4940-01-525-1228 |
3M PPS Standard Lids and Liners Kit contains 50 disposable lids, 50 disposable liners and 20 sealing plugs for use with the original PPS spray gun system, an all-in-one solution for measuring, mixing, filtering and spraying paint materials. Unlike conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. Simply place a liner in the reusable paint cup, mix the paint, snap on the lid, attach the locking collar and you’re ready to spray. With a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. Each lid strains paint material with a built-in 200-micron filter, commonly used for solvent-based paint materials. Specially designed PPS stainless steel metal adapters let you use the PPS system with virtually any spray gun.
Customer –
good but too simallè
DonWood –
I’m using them with a Fujispray G-XP and M model HVLP gun. I own the 6oz and 28oz systems. This review is for the 6oz.PROs:It’s great to be able to tip the gun in any direction and not have any leaks. This makes the CONS listed below only minor inconveniences.Clean up is easier than a regular cup.The pressure tube never gets material backed up into it anymore!The built-in filters are nice because you don’t have to strain the material.Short term storage in the disposable cups is nice, though it’s pretty much impossible to stir it later in the collapsible cups.MyCONS:6oz is a little small for the spraying I do. I wish they were just a bit larger, (8 or 10oz). The only other size available for the H/O model cups is the 28oz which is awkward and strains the wrist.Refilling during a job is a bit more difficult than refilling a regular cup since you have to remove the pressure tube and let the material drain from the gun into the cup. Otherwise it would be a drippy mess.
JC III –
Have been using this system for over 3 years now and having to clean the cup of an older system seems too time consuming and a waste of thinner. Pour in the paint, put on the cap and start spraying, awesome, especially the any angle spraying. Great product!
Dennis in SoCal –
I bought a Iwata Baby Series LPH80 that came with a plastic Iwata cup and a 3M PPS system. It included the adapter and 1 liner along with the ring and holder. I tried the gun with the standard cup once and then later the PPS cup. All it took was one try and I was hooked. Ordered a pack of these liners and lids for future use. These cups work great with a HVLP gravity gun. I haven’t tried using it upside down yet, but looks like it will work just fine.
Isaac J. –
Great product for finish work. My package came only the liners, and NOT the Midi cup, collar, and generic ratio insert. When I contacted the seller, they sent me the rest of the package.
Razevil –
To be clear I use to use these alone, using the clips, but had one issue with them once where they leaked and decided to use them in conjunction with a PPS cup, which is a great option. You break off the tabs and use it as a line to a pps cup, with no issues. The only other issue I had is that the measurements/scale wipes off after first use, so having it inked on to the cup which would be great if it worked, is a not good. No big deal, you just need to use a measuring cup to mix the paint
Lord vicious –
Extremadamente practicos, los compre en $1,900 osea q cada vaso me salio en 39 pesos, pero me ahorro el vaso, la lavada, el colador, thiner, la pistola hvlp ahorra mucha pintura. Trae 25 tapones, he visto la publicaion hasta en $1,300 desgraciadamente ya los habia comprado 2 meses atras.
Customer –
Exactly what I needed, great quality and fast shipping.Very good price
Nelson ricardo machado –
When it come to clean up, the pps system is convenient because it makes cleaning your gun a lot easier by not having to clean the original cup that comes with the gun itself. You can also use the cup and lid to stored left over paint.
Fredy R. –
Excelente producto para la preparación de pintura
Les Productions LNDMRK –
SUPER UTILE
Blakely Radford –
These are excellent. Wish they weren’t so expensive but this is one of the better prices that I have found!
Rose –
Painting and its fits our needs we will continue. to buy this 3M PPS we use them a lot. thank you for asking.