Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Brand: Omix-Ada
| Brand | Omix-Ada |
|---|---|
| Auto Part Position | Rear |
| Material | Aluminum |
| Included Components | Leaf Spring |
| Maximum Lifting Height | 2.5 Inches |
| Manufacturer | Rugged Ridge |
| UPC | 804314075873 |
| Global Trade Identification Number | 00804314075873 |
| OEM Part Number | MS-WSC60 |
| Item Weight | 15.2 ounces |
| Product Dimensions | 8 x 4 x 2 inches |
| Country of Origin | Taiwan |
| Item model number | 18206.01 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 18206.01 |
Omix proudly offers a vast collection of OE quality replacement parts for Jeep & Willys vehicles to help keep the Jeep legend alive. This rear leaf spring shim fits 76-86 CJ and 87-95 Wrangler YJ models. This shim is used to correct pinion angle issues on vehicles with lifted suspensions. Shim measures 2.5-inches wide, 4.75-inches in length and 0.75-inches tall. For 8 degree shims, use 18206.02
Lucas C. –
This was perfect for my 95 Yj. I lifted it four inches and the driveshaft was at a bad angle and would vibrate the rear end. Once these were installed it lined up the drive shaft very straight and rode smooth! I just wish it came with new bolts!
Customer –
Set pinion angle
Justin R –
These worked for my CJ with YJ spring conversion. Needed more castor after install. These balanced out the angle at stock height.
buyer –
Well made, rough finish aluminum to prevent slipping, and curved for spring curve. I had to drill the hole out to fit my spring bolt, but otherwise, PERFECT!! I needed the six-degree wedge, checked these and found to be an actual six degrees. I will purchase again if needed, and I recommend them to anyone needing a curved wedge to match the springs.
Luke A. Blakely Zroback –
Works great. Thought it was steel but it is aluminum.
Frank b –
Le produit es très mauvaise qualité. L’aluminium écrase et brise.
Customer –
Not a true 8° shim. It’s actually 9° if it is that important to you that the product matches the description and also not a single face of the actual product is square. Cheap sand cast aluminum which is fine, but the quality control is definitely not there.
SUPREME BEARINGS –
fast service
Tom A. –
After a bunch of modifications, my lifted YJ got a slight vibration going down the road. I calculated 7 degrees to get my transfer case, driveshaft, and pinion angle sorted out. So I went with the 8 degree shim and pointed my pinion up towards my transfer case (I switched to a double cardan SYE kit). Huge difference! The vibration is completely gone.
Jim OBrien –
Gave me the angle that’s works great. I do recommend them
Charliex –
I installed this shims to my 6” lift truck