Skip to content
Clear product details Fitment guidance Contact support
ExactFit Parts Specs and fitment made clearer.
My account Cart 0
Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set - Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC - 61072 - Made in USA

Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set – Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC – 61072 – Made in USA | Specifications and Fitment

$230.43

SKU: B-B07VNH38BZ Category:

Use the specifications, images, available variations, fitment notes, and referenced part numbers to check this product against your application.

  • NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERING
  • Will fit all model balancers with 40mm X 4mm thread pitch shafts (approximately 7 threads per inch)
  • KIT CONTAINS: Wing Nut, Pressure Cup & Rubber Ring
  • Fits all of the following wheel balancer models with a 40mm X 4mm thread pitch shaft: Accuturn: 1200,1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650,1820 & 1850, Bosch: All Models, Cemb: All models with a 40mm diameter shaft, 1995 & later, Coats: 775, 875, 1175, XR Series
  • FMC / John Bean: All Models with a 40mm shaft, HOFMANN: All models with a 40mm diameter shaft, Kwik Way: 402, 571, HS, 572, 574, 576, 578, Launch: 408, 500, SNAP-ON: All models with 40mm shaft
  • MADE IN USA!

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.

Description

Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.

OEM Style Replacement Wing Nut for 40mm X 4mm Thread Pitch Shafts. Will fit all model balancers with 40mm X 4mm thread pitch shafts. To check, measure the diameter (40mm) and the thread spacing (4mm) on your balancer shaft. Thread spacing is the distance of one thread and one space; for example, the distance from the left edge of a thread to the left edge of the next thread. NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERING

Product facts

Specifications

Canonical product
MP-US-B07VNH38BZ
Source product ID
B07VNH38BZ
Category
Tools & Equipment / Tire & Wheel Tools / Wheel Alignment & Balancing Tools
Available images
2

Vehicle information

Available fitment details

Listing compatibility notes

  • Will fit all model balancers with 40mm X 4mm thread pitch shafts.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Parameters, dimensions, material, fitment, and part numbers

Buying guidance

Quick decision

A wheel alignment & balancing tools listing with source specifications kept visible for comparison.

Fit and size notes

  • Will fit all model balancers with 40mm X 4mm thread pitch shafts.

Before you buy

  • Compare the listing title, photos, package contents, and specifications with the part being replaced.
  • Confirm vehicle compatibility and installation requirements before ordering.

Customer feedback

Ratings and written reviews

Reviews below were submitted through this store.

Reviews

There are no reviews yet.

Be the first to review “Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set – Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC – 61072 – Made in USA | Specifications and Fitment”

Your email address will not be published. Required fields are marked *

Related products