Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
Headlights not only help you see the road ahead clearly in early twilight, evening or any dusky surroundings, but also make it easier for other drivers to see you. If you find your headlights become yellow or cloudy, it’s time to replace a new one to improve the visibility and your driving safety and others’. Upgrade your car with a new high-performance set of AUTOSAVER88 headlights to put yourself and other drivers at ease & make you feel more confident when driving at night.
Compatible with:
2002 2003 2004 2005 2006 2007 2008 2009 Chevrolet Trailblazer
2002 2003 2004 2005 2006 Chevrolet Trailblazer (EXT)
PART NUMBER: 1221-0087L, 1221-0087R
HOLLANDER: 114-00686L, 114-00685R
OEM: 25970915, 25970914
PARTSLINK: GM2502213, GM2503213
Moisture Inspection
To ensure the inside of headlights does not accumulate moisture and the visibility is not restricted.
Anti-crack Inspection
The Inspection of shaking the headlights thousands of times before packaging enables they to keep in good condition when you drive on the rough road.
Temperature & Humidity Inspection
To ensure the headlight assembly can work well at a wide range of temperature and humidity and its light output is not decreased.
Vehicle information
Available fitment details
Listing compatibility notes
- Compatible with: 2002 2003 2004 2005 2006 2007 2008 2009 Chevrolet Trailblazer 2002 2003 2004 2005 2006 Chevrolet Trailblazer (EXT) PART NUMBER: 1221-0087L, 1221-0087R HOLLANDER: 114-00686L, 114-00685R OEM: 25970915, 25970914 PARTSLINK: GM2502213, GM2503213 Moisture Inspection To ensure the inside of headlights does not accumulate moisture and the visibility is not restricted.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A headlight assemblies listing with source specifications kept visible for comparison.
Fit and size notes
- Compatible with: 2002 2003 2004 2005 2006 2007 2008 2009 Chevrolet Trailblazer 2002 2003 2004 2005 2006 Chevrolet Trailblazer (EXT) PART NUMBER: 1221-0087L, 1221-0087R HOLLANDER: 114-00686L, 114-00685R OEM: 25970915, 25970914 PARTSLINK: GM2502213, GM2503213 Moisture Inspection To ensure the inside of headlights does not accumulate moisture and the visibility is not restricted.
Specification notes
- Color: Black Housing, Black Housing Amber Reflector Clear Lens, Black Housing Clear Reflector, Chrome Housing, Fit 00-05 Impala, Fit 05-10 Cobalt, Fit 14-20 Impala
- Style: 1997-2003, Fit 2000-2005 Impala, Fit 2014-2020 Impala, Black Housing, Black Housing Amber Reflector Clear Lens, Black Housing Clear Reflector, Chrome Housing, Chrome Housing Amber Reflector Clear Lens
Before you buy
- Verify the referenced part number: 1221-0087L.
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.3 / 5
2,393 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Sonya –
These lights came packaged very well. There were no cracks or defects. The seals on them were all good. It has been raining where I live and no water has gotten in. The bulbs were included. They were made in China. Inspect them before you put them on your car.Adjusting the light beam is limited! The driver side beam is supposed to be lower than the passenger side so it doesn’t blind other drivers on the road. The passenger side is high enough so you can see the side of the road for animals. Keep this in mind when adjusting.My car looks like it got a facelift. The shiny newness of these lights made a difference. I got the chrome ones.The price was worth it. Installation was easy. You just pop out two clips and plug them in. Make sure the seals on the ends are placed right. Don’t pinch them.Good product. Very Satisfied with these.
David J –
Bit about me so you know my experience level…. I’ve been an tech for over 20 years. Started out in autos and moved on to heavy equipment, mainly tractor trailers and refrigerated units. So, I do know my way around a vehicles in case you too were reading comments as I was and wondering about the authors experience level vs issues…..Got these headlight in and from outer appearances they look good, good… not great.The lenses are fine, and as I would expect from any light. Protective plastic on top, no scratches and 100% clear looking. A closer look relieved the molding, especially the silver trim where the clear meets the black is suffering from stress cracks out of the box. Not a deal breaker at this price point, but is a flaw worth noting.I choose to use the bulbs I had in the OEM units instead of the ones that came pre-installed (yes, each bucket came with a high, low and turn bulb to answer that question). I saw nothing wrong with the bulbs installed, but lets be honest….. sylvania 9005 are $40 dollars, these headlights are under $100…. How good do you think the bulbs they came with are?Taking the bulbs out was easy enough, felt normal, all be it the bulbs twisted the opposite way for one of them…. can’t remember now if it was the high or low beam, but was defiantly the reverse of OEM. The bulbs are loose in the hole when I take the sylvania lights and install them so I check to see if the included ones are different…. they’er not, they too are loose and I just didn’t notice it immediately as they came out so easily.This explained why some who reviewed them said they fog up or get condensation inside. As the o-rign in the light never seals against the hole they are inserted in…. Think 1″ dia. hole for a 1/2 in shoulder on the bulb…… not going to EVER seal and is the first major flaw I find.Installing the electrical plug is “fun”, but if you sake your time, lube the weatherpack and “feel” for the pins you can get it plugged in. This is usual to me as most of these sorts of things (non-OEM) come in with bent pins and such. I don’t consider it a flaw as it’s just normal after market BS you deal with.Tested the operation before mounting and I have low, high, marker and turns so it’s time to install, and time for the first real headache.Installing the bucket in the car was a bit of a challenge as the alignment/lock pins are made off just enough that getting the lock pins back in required me to modify the inner most lock for each bucket. Looking at it from top down you can see the lower “wedge point” or “T” is just a tad too short in sticking through the cars mounting surface. Still, since this should not normally affect the operation once locked in, and since I had replacement locks in hand, I took them and shaved the bevel at the leading edge a bit with a knife to get them to start in the lower brackets, and all seemed well. Note, the dormant locks were not at fault as even the OEM one were the same…… had replacements on hand originally in case I broke the OEM ones, and since the dormans were open…. I chose to modify those and not the OEM.So far, nothing yet has been a real deal breaker for me. The old ones are dry and cracking, making it look frosted, so at this point, these are an upgrade…. Key words….AT THIS POINT.Driving the car to an area I use to adjust headlights I can defiantly tell they are pointed low. This isn’t a big deal as I’m in the burbs and pretty much don’t need them 90% of the time. I get to the location and mark out the levels, my distance back and where the new levels should be. This is where I will be contacting the company for refund or replacement….. The adjusters hardly move the light up a 1/4 inch and they are maxed out and giving you that “no more threads to grab” pop. I figured, ok…. drivers side is bad and I move onto the passengers side. SAME THING.The drive home was basically the same as the drive to my spot, bight puddles immediately in front of the car but no light being pushed down road. No light illuminating speed/stop or other such signs and there’s on even enough height to illuminate license plates on parked cars you pass.Today is Oct 17/2019, I will be contacting the company for another set or a refund. If they wish me to try another set, and if that set is better, I will update this. If no further update is made, assume I got a refund and found a set elsewhere…..—-Update 10/25/19—–I reached out to the seller and they shipped out a replacement set. This set is, unfortunately, worse than the first. The adjustor on the second moved the light up an almost unnoticable amount. The headlights look great, but you get absolutely no light being pushed down road.While I will say with 100% certainty the adjusters do not work at raising the headlight to a proper angle, I think the poor fitment of the bulbs add to issues producing a non-focused reflection pattern, further adding to the lack of down range lighting.I have tried taking video to demonstrate this, but in the video, with the “puddle” of light being so close to the car, it washes out what it witnessed by me. So, I will attempt to explain. The lights create a very bright spot directly in front of the car, maybe 10 feet long. Inside this area visibility is good, but this hinders your ability to see further (not that light ever reaches further) in the same way you can not see into a darkened tunnel when the suns in your eyes. One test I did was to drive down the road to where I had placed a bag in my lane. Even while I know where I had placed it, I could not see it on the dark road till just before the bight spot produced by these light… maybe 11 or 12 feet. With the weathered OEM lights installed, I could see an object in the road a good 200-300 feet away. While I couldn’t tell what it was, had I not been the one to put it there, I could see there was something there. within 75 feet or so I could make out roughly what it was, and at 30-50 feet I could tell it was a McD bag. (all tests done at 25 MPH).If your only going for “looks” and will never drive your car, fine. These will work. If your like nearly everyone else, keep looking, these simply do not work.I would love to test further and see if I could fix them (perhaps that’s the mechanic in me), but as it is a sealed unit, I can’t return them AND cut them open to test….. so testing stops here for me.
Cody Soucia –
Arrived late, but to be expected with the highways being blocked in some areas from protesters. Not a big deal. Really sharp looking. If your going to do the silver option i highly recommend getting WHITE LED’S for the marker light. Doesn’t look right with the OEM baulb my opinion. I will check back in a month or so if I remember for reliability an how they hold up. Just got them an installed today July 28th 2020. They feel like good quality. Satisfied with them so far. I’ll check back in about a month or so. An mine came with high an low beam baulbs installed, i was pleased. I bought LED high/low beam kit on here so I installed them before installing them on the vehicle.Update: August 5, 2020I know I said a month, but I feel I have to say something.. I love the look of the headlight housings. The the metal plate were you twist the bulb to lock it in want in the right spot for me. (Still have LED’s) had to twist the plate an get them aligned correctly so my LEDs would work. The passenger side adjustment screw doesn’t do anything now. Probably my fault for adjusting to far, IDK. But all an all good Setup to give your Trailblazer a little face lift so it’s not so plane. I like them. Backing down a star just because it was a pain to adjust the plate. Other than that, I would really consider buying again.So its been about 2 years I’ve seen an I thought I would update again.. Holding up really well No fog or anything. If you get LED’s an you live in the snow belt like I do, the snow does stick to them because the LED’s don’t produce heat. Other than that holding up amazingly. Not one complaint. Highly recommend!
CC1500 –
Perfect aftermarket replacement for my 2008 Cobalt. No issues.
Customer –
3 weeks late from when they where suppose to show tried sending them back I can’t because I’ll have to pay a none refundable shipping charge and they said it was covered not covered went to 3 different place each place told me not covered I got harassed on New Year’s Eve and on Sunday not happy at all!
Justin Rickard –
My TBSS has been out of storage for less than a month( lights not use last year) and there dew Inside the passenger side light.
A O –
Excellent
Tony the Tiger –
Clear and new 😎
james martin –
These new headlight assemblies make the car look a lot better. They fit really good and they were easy to install on this make and model.
Randy W –
Headlight replacements were perfect. And at a great price
Customer –
These are by far the best fitting aftermarket headlight assemblies that i have ever installed and they came with bulbs!!
Joseph Johnson –
Look and fit perfect.
Raymond O. –
Great looking pair of headlights! Excellent factory fitment. Much better than my 20 year old headlights.I bought these for modifying/retrofitting, however they are sealed with silicone and are an incredible pain to seperate of that’s something you’re interested in.