Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Features:
1.Block ultraviolet rays, care for the skin, and reduce the troubles caused by direct sunlight. Effectively protect the interior of the car. Reduce fading and aging caused by sunlight exposure.
2.It can be cut for various applications, such as window coloring, car coloring, etc., and cut to appropriate sizes as needed.
3.It can effectively block sunlight or the strong light of car headlights, reducing the visual impact caused by strong light.
4.Avoid overheating caused by direct sunlight and reduce the temperature inside the car. Thereby reducing the use of air conditioning and saving fuel.
Instructions:
Step 1.Measure the size of the car glass, the length and width of each one plus more than 3 cm, so as not to install the film does not conform to size.
Step 2.A clean window is vital a successful factor,so keep window or glass clean.
Step 3. Remove the transparent backing sheet from Film .Cover the surface of the whole film with water.This helps to prevent the film becoming tangled and sticking to itself.
Step 4. Pick your film up and apply to your window( Please MAKE SURE you have removed the backing sheet before you apply to the window and glass).
Soap and water on film and glass can make it slide to the correct position.
Step 5. And repeat scraper process,using the scraper to push any remaining moisture or bubbles to the edge of the window.Much easier than Wall Decals.
Step 6. Finally use the paper towels to dry the window and the frame,being carefully not to lift the film at the edges or corners.
Specification:
1.Material: PET
2.Size: 1Mx3M
3.Transmittance rate: 84%
4.UV protection: 100%
5.Insulation: 92.8%
Packing Includes:
1 Roll Car Window Tint
Daniel M –
Ich habe mir diese Folie bestellt. Nach einer gewissen Zeit kam sie auch endlich und dann habe ich sie auf die Scheiben meines Autos probiert drauf zu machen. Leider was kam raus. Die Folie hatte überall Löcher und dergleichen so das ich sie wieder entfernen musste und dann ist sie in den Müll gelandet.Mein Fazit : nicht empfehlenswert
Nick wyatt –
The product came with creases in all ready had an appointment set to have it put on and was told it would be a waste of money to install on a Brand New car. đź‘Žif there was a no start rate it would be that.
faraz ali –
Tint was cut bad,could not be fitted while heat was applied to it,due to how it was cut.