Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
- Is Discontinued By Manufacturer
:
No
- Package Dimensions
:
13.15 x 8.86 x 2.52 inches; 2.95 Pounds
- Item model number
:
BDCT-001
- Date First Available
:
May 14, 2018
- Manufacturer
:
Lemur Vehicle Monitors
- ASIN
:
B07D2CG1TT
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A compression gauges listing with source specifications kept visible for comparison.
Fit and size notes
- No structured vehicle fitment was supplied; verify the product details against your application.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.6 / 5
1,419 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Nick –
I love this compression tester. I have had 3 testers so far, and this is definitely the best. Harbor freight tester was just junk, and read about 30psi under what compression really was. Junk. 2nd tester was a Bosch unit I bought for well over the price of this tool. Or held up for about 4 months, then started giving me funky readings. Now reads about 10psi less then this tester. The o rings were junk and did not last very long. You can tell the o rings are thicker and better quality then my other two testers. The case makes this tool feel like atleast a hundred dollar tool, I ride and work on highperformance two stroke jet ski motors, and use this tool often. Please click helpful if this review was helpful to you.
Luciano –
Ottimo prodotto qualità prezzo
Mecanitron –
no lo he probado pero parace de calidad
SL 94383 –
Buying the Bluedriver OBD II I purchased this by accident. This compression tester must have been a special option checking out.. kinda sneaky.But a Good price. Very nice looking guageGreat selection of quick release module adpaters 1 straight 1 angle push on.4 threaded plug low profile adapters with a unique detachable hose. Verses a standard crimp on hose.Identical readings compared with my U.S. general module kit.looks like i will keep this set bluedriver set with better looking and design.Accurate and consistent.
Hunter L. –
Does what it says accurately, everything I have tested has been dead nuts on. I like the look and feel of the product, easy to read and feels high quality, lots of attatchments that I will never use, but better to have it and not need it as my old man would say.The real reason im bothering to write a review is for the customer support. I bought this instead of a leak down tester thinking I could simply attatch shop air to the whip, and blow air into the cylinder using their fittings for much cheaper than a leakdown the only down side to this product is that the male fitting on the whip is an extremely non-typical fitting, so good luck finding an adapter for your air compressor, however, when I attempted to contact support they immediately responded, were very kind and professional, and even over-night shipped me the female quick coupling I was attempting to buy.
Top Shelf Hobby –
Bought this to check my son’s compression in his Honda CRF 70 dirt bike. The thing was burning more oil than hippies at a Woodstock concert. It smoked like Cheech and Chong just opened the van doors. Luckily this kit had a fitting which fit perfect to the small spark plug hole, I’m not used to holes this small if you know what I’m sayin’. I screwed on the gauge and kicked it over, compression is supposed to be between 120 and 140 PSI and all it pushed it was 40 PSI, so that tells me it needs a piston and ring job. Not the Job I’d like to be receiving I tell you that ! Next step is disassembly of the engine, inspect, and order some new parts. Without this tool I would have been guessing, and forever polluting the environment with our little 70cc smoke cannon.
Walter B –
I bought this product over the others because I already have the OBD tool from Bluedriver and it surely did not disappoint. Once it arrived, I used it to test 2 of 6 cylinders and both were the same psi reading so I knew it was fairly accurate. This is my first compression tool used as a DIY and the results albeit two cylinders gave me piece of mind knowing I did not have a bad head gasket. Priceless!! I’ll be testing the remaining four cylinders when there is daylight. Only issue I had was having to massage the rubber extension hose to make it straight for easier installation.
James C. –
I had a cheap one from Harbor Freight, but accuracy was lacking. Come to find out, it had the shrader valve at the back of the hose instead of at the tip. This one replaced my HB one has been very accurate. Highly recommend if you do any buying of used equipment (boats, atvs, mowers, etc.)
Trickel –
First off the case that this compression tester comes in is great, and the foam cut outs make it seem like a high quality kit. This compression tester worked very well the first time I used it, it held the compression until I released it. I had consistent readings on the same cylinder each time I tested it.I like that there are several adapters included that should work on many different engines.There are a couple things I don’t like about this kit. I wish the extension hose had a hex on the end so it could be tightened and loosened easier. The crimps on the hose also seem to be fairly cheap, I haven’t had any issues so far, but time will tell how long they’ll last.The last issue I have with this kit is the guage face itself, the gauge I received definitely must’ve been missed in QC as the numbers are not centered very well and as can be seen by my pictures they’re on the very edge of the gauge. This doesn’t prevent the gauge from working but it is a bit irritating to look at.I would still recommend this set for the price.
Michael –
Hi, I first bought a different compression tester and after checking all my cylinders was both scared and shocked. Nervous because it showed my compressions to be lower than the acceptable range by at least low by 30-40 points. So, at first, I thought I needed to buy another engine. Then I ran a second and the third test for each cylinder again and saw the new results to be all over the place. The second test was less than the first one by 10 points and the third result was more than the first one by many points. So, I knew I needed to return it ASAP.Then I drove for 30 minutes to Autozone and borrowed their compression tester just to come home and find out that they do not have an adapter that fits my Mercedes. Very disappointed I went online. I checked many compression testers and compared them against one another until I decided to get this one and I was very pleasantly surprised after receiving it. The case is made of high-quality materials. Although the foam inside did not keep some of the fittings in place, but I could care less about that. I needed an accurate tester. I tell you, I check every one of my engine’s six cylinders twice, and not only my compression results were at a very good level but just as important the second test results were either identical to the first one or differed by no more than 2-3 points. I am very pleasantly surprised by the accuracy and consistency of my new gauge and would highly recommend it.
Guy Gross –
LE PRODUIT EST DE TRES BONNE FACTURE ET SURTOUT COMPLET POUR FAIRE FACE A TOUTES LES SITUATIONS QUEL QUE SOIT LE TYPE DE BOUGIE . A ACHETER SANS MODERATION!!
James R Harper –
have not used it yet & have to download the instructions, Thought I had a compression issue, turned out 2b something else, So I have not need it but keeping it cause I know may need it later…+ it’s waaaaaaay past the return date LOL.
vimalan –
Works great