Skip to content
Clear product details Fitment guidance Contact support
ExactFit Parts Specs and fitment made clearer.

Muncie Pump, 1′ Shaft, 15 Spline | Miller 17 Gallon | PK1-17-17KSBBX | Specifications and Fitment

$799.99

SKU: B-B0FBYTKVJ8 Category:

Use the specifications, images, available variations, fitment notes, and referenced part numbers to check this product against your application.

  • PK1-17-17KSBBX
  • 7 GPM @ 1,000 RPM with 2500 PSI
  • 1″ pump drive or a 1″ shaft 15 Spline
  • It has an approximate 4.000″ pilot that sticks out approximately 3/8″ and the bolt holes are approximately 3.525″ center to center with an approximate bolt circle diameter of 5.000″ center to center.
  • The pump is about 10″ long, end of shaft to end and about 6″ wide with two outlets on the back.

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.

Description

Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.

Brand: Bad Ass Tow Products
Manufacturer ‎Muncie
Part Number ‎PK1-17-17KSBBX
Item model number ‎PK1-17-17KSBBX
Included Components ‎Pump
Warranty Description ‎1 year manufacturer

PTO PUMP MUNCIE 17 GPM, 1 INCH, 15 SPLINE Like New- Never Used- taken off trucks for custom builds The Muncie K Series Pump operates at speeds up to 3600 rpm with a high maximum pressure threshold of 3000 psi. The cast iron and heavy duty roller bearings deliver reinforced durability, and the four-port design offers installation flexibility. – Measures 1 in. – Weight: 35 lbs. Muncie Power Products Hydraulic Pump part number PK1-17-17KSBBX for a 2000/3000 Allison/Jerr Dan Roll Back or any other application this unit would fit.

Product facts

Specifications

Canonical product
MP-US-B0FBYTKVJ8
Source product ID
B0FBYTKVJ8
Category
Replacement Parts / Engine Cooling & Climate Control / Water Pumps
Available images
5
Referenced part numbers
PK1-17-17KSBBX

Vehicle information

Available fitment details

Listing compatibility notes

  • Muncie Power Products Hydraulic Pump part number PK1-17-17KSBBX for a 2000/3000 Allison/Jerr Dan Roll Back or any other application this unit would fit.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Parameters, dimensions, material, fitment, and part numbers

Buying guidance

Quick decision

A water pumps listing with source specifications kept visible for comparison.

Fit and size notes

  • Muncie Power Products Hydraulic Pump part number PK1-17-17KSBBX for a 2000/3000 Allison/Jerr Dan Roll Back or any other application this unit would fit.

Before you buy

  • Verify the referenced part number: PK1-17-17KSBBX.
  • Compare the listing title, photos, package contents, and specifications with the part being replaced.
  • Confirm vehicle compatibility and installation requirements before ordering.

Customer feedback

Ratings and written reviews

Reviews below were submitted through this store.

Reviews

There are no reviews yet.

Be the first to review “Muncie Pump, 1′ Shaft, 15 Spline | Miller 17 Gallon | PK1-17-17KSBBX | Specifications and Fitment”

Your email address will not be published. Required fields are marked *