Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
| Brand |
Master Airbrush |
| Tank Volume |
600 Milliliters |
| Color |
White |
| Recommended Uses For Product |
Painting |
| Material |
Metal |
| Item Weight |
1.55 Kilograms |
| Style |
Gun |
| Included Components |
40 cup liners, 40 lids with strainers, 1 hard cup with retainer ring, 10 sealing plugs |
| Model Name |
Master Paint System |
| UPC |
848849080100 |
| Manufacturer |
Master Airbrush |
| Part Number |
MPS-16600-40 |
| Item Weight |
3.4 pounds |
| Package Dimensions |
16.61 x 13.43 x 7.64 inches |
| Item model number |
MPS-16600-40 |
| Size |
20 Ounce Cup Kit |
| Item Package Quantity |
1 |
| Special Features |
Low Volume |
| Batteries Included? |
No |
| Batteries Required? |
No |
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A spray guns & accessories listing with source specifications kept visible for comparison.
Fit and size notes
- No structured vehicle fitment was supplied; verify the product details against your application.
Specification notes
- Size: 6 Ounce Cup Kit, 6 Ounce Set Hard Cups, 6-oz, 20-oz, 27oz, 20 Ounce Cup Kit, 20 Ounce Set Hard Cups, 27 Ounce Cup Kit, 27 Ounce Set Hard Cups, Spray Gun Adapter - PRO-44
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.6 / 5
1,629 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Bill Dhaliwal –
Cup is well made. The fit is correct and does not leak even when inverted
Bob Teaford –
I love these cups! Some reviews mention leaks, I have had none but probably because I am very careful assembling the cups. The liners are cool, they drop into the hard cup. Pour the paint in, then put on the top(with the feed hole and integrated filter). This is tricky, it has a number of clicks as it settles into the liner. It has to be settled all the way in, kind of subtle, I suspect if this is not done then leaks will be had. Next is to screw on the black retaining ring. This too is fiddly, very easy to cross thread. I sight from the side and watch it go on. Also when screwing it on it can be screwed on too tight and skip threads, it needs to be ‘just tight enough’.There are no directions and very few if any online tutorials so I will continue. Once filled and capped keep the cup with the orifice pointing up and push the gun onto the cup. This has a few hitches/bumps as it goes on. Once it is completely seated twist one notch for complete seal. Then attach the gun to air and pull trigger with the gun upside down and all the air will be sucked out of the cup, leaving only paint in the now collapsed liner. Very cool! This is what lets you paint upside down without sputtering, paint keeps flowing.I tried to refill a cup and it didn’t go well. If I need more paint I use a new cup. If I have lots left over I put the cup on top of my paint can and let the un-used paint dribble back into the can.Overall way better than the stock metal reuse-able paint cup, I will never go back!
Albert Alford –
everything works quite well except the locking ring is touchy to tighten.
Eric R Metzdorff –
I do small painting jobs to support my hobby, switching to these paint cup liners has really cut down clean up chore. They have never leaked on me dispute having to flip upside down for gravity feed gun.
Seng V. –
You get what you pay for. The best out there for the price. No leaks, lids actually seal and don’t pop off from pressure. Fitment is a little snug but does not crack like others.
Cal Robinson –
product was as described and worked exactly as described. very happy with product
HowFar69 –
These are a must-have if you are a user of pneumatic spray gunsEasy cleanup each of the cups has its own filter installed there is three sizes available and they’re able to be capped as well
Al Rivera –
Economical, the liners fit perfectly in the cup and the cup collar threads easily on the cup, will buy again.
RR –
Nothing to dislike they work great for automotive painting.
Revuta Giesbrecht –
Extra hard cups are always handy and save time. You can have 2 ready at once, etc etc. Also nice to not have to stop and clean up until the end of the day.