Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
This tool sets with two sizes 3/8″ and 1/2″:
3/8” size Compatible with 2003 – 2010 Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS.
1/2” size Compatible with Ford Super Duty Trucks, F250, F350 and F450.
Material：Made of High quality aluminum.
Easy to use ,this worked in seconds. It is strong, smooth to operate, and it’s just the right size.
This tool is for pushing back the locking devices on the transmission fluid lines.
Package included:
1pcs 3/8” size disconnect tool
1pcs 1/2” size disconnect tool
Vehicle information
Available fitment details
Listing compatibility notes
- [ Fitment ] : 3/8'' size Compatible with 2003 - 2010 Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS.
- [ Fitment ] : 1/2'' size Compatible with Ford Super Duty Trucks, F250, F350 and F450.
- This tool sets with two sizes 3/8" and 1/2": 3/8'' size Compatible with 2003 - 2010 Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS.
- 1/2'' size Compatible with Ford Super Duty Trucks, F250, F350 and F450.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A fuel line disconnect tools listing with source specifications kept visible for comparison.
Fit and size notes
- [ Fitment ] : 3/8'' size Compatible with 2003 - 2010 Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS.
- [ Fitment ] : 1/2'' size Compatible with Ford Super Duty Trucks, F250, F350 and F450.
- This tool sets with two sizes 3/8" and 1/2": 3/8'' size Compatible with 2003 - 2010 Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS.
- 1/2'' size Compatible with Ford Super Duty Trucks, F250, F350 and F450.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.5 / 5
511 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Jesús zenteno –
La herramienta muy buena y la verdad muy fácil quitar la conexión como dicen en cuestión de segundos
BlackCoffee –
This tool is so much better than the scissor tools. Love it. Broke two scissor tools trying to get my line loose from a 2003 Ford Expedition. They would not go deep enough to release the clip. This tool fit well and is a little deeper which release the clip. Not going back. The scissor tools were both good brands, one was a Lisle which is also sold by SNAP-ON. This tool works.
David Y –
Needed these offset removers to go over the lip on 2010 Ford Fusion transmission line. A little spendy for a simple 1-time / 1 use tool, but can’t do the job without it. Compact size was definitely a plus as well. Does the job easy.
Phil –
This is the second style of tool I purchased to remove the cooler line on my 2006 F-250 as the first cheaper tool has very little leverage or any practical way to apply force. The inlet I was trying to remove the line from had rusted quite a bit and I had to put an open end wrench around the face of this tool and hammer it in to get through the rust and corrosion to free the line. This tool provided a great surface to apply force to (which the different tool I bought previously didn’t) and was able to free up and fully seat so I could remove the line. Nothing on the tool broke in spite of the significant abuse I gave it, only markings on it were cosmetic.
Dan Taz. (Safety First) –
I bought these with the expectation of potentially having a bad set and needing to return them. But to my delight, they aren’t too shabby!I’ll update after I use them :)UPDATE: Yea not going to cut it….Problem is that the swivel design makes it difficult to get the tangs over the metal line and into the fitting.ALSO the tangs on the tool are way too thin so it does nothing to release the plastic inner tabs that hold the tube into the adapter.I had to use strips of plastic I cut from a used container. You can use a milk jug or sour cream or yogurt container ect…One of my transmission line adapters was rusted such that it was pushing the inner plastic tab inwards so much that nothing worked. Had to remove it with a 13/16 wrench and then head the adapter and pull the line out then replace the adapter.I replaced both with ford OEM parts to prevent any future headaches.The only thing that would really work is to make this two separate pieces, instead of the swivel design, and make the end tangs much, much thicker. The tool would end up being like a pry tool of sorts that forces the inner tabs of the line cooler adapter away from the cooler line. That would be the only useful design, really.
Michael T. –
Unable to use this tool for its intended purpose as it doesn’t have the 3 sections cut out of the head to key into clip on the oil line!
Melissa –
Easy to use and fits in perfectly. I purchased these to add to my other line disconnect tolls for those hard to get to places where a regular one will not fit.
Customer –
Alot tougher than the plastic ones especially if you live in the midwest.
BRE K. –
2 sizes, works good, good finish.Buy the metal ones, NOT the plastic ones
Customer –
Easily removed transmission cooler lines for 2011 Ford Fusion