Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Applications:
It is a bolt on for the KLX / DRZ 110 bikes. This hot new item will turn your existing stock or aftermarket frame into a cradle frame, without the big $$$ hit to your wallet
It will fit KLX 110 and DRZ 110 . The kit comes with all the hardware to bolt it to your frame or you can have it welded on for added strength and protection
Benefits
* Added support to your motor (no more broken motor mounts)
* Added strength to foot pegs (no more bent foot peg mounts)
Features
* Made in the USA
* Tig Welded
Vehicle information
Available fitment details
Listing compatibility notes
- Fit for Kawasaki KLX110 and Suzuki DRZ110 Professional installation recommended Package Contents: 1 Piece with Bolts (As the picture shown) This product can protect your engine from ripping out the bolts Applications: It is a bolt on for the KLX / DRZ 110 bikes.
- This hot new item will turn your existing stock or aftermarket frame into a cradle frame, without the big $$$ hit to your wallet It will fit KLX 110 and DRZ 110 .
- The kit comes with all the hardware to bolt it to your frame or you can have it welded on for added strength and protection Benefits * Added support to your motor (no more broken motor mounts) * Added strength to foot pegs (no more bent foot peg mounts) Features * Made in the USA * Tig Welded
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Parameters, dimensions, material, fitment, and part numbers
Buying guidance
Quick decision
A frame guards listing with source specifications kept visible for comparison.
Fit and size notes
- Fit for Kawasaki KLX110 and Suzuki DRZ110 Professional installation recommended Package Contents: 1 Piece with Bolts (As the picture shown) This product can protect your engine from ripping out the bolts Applications: It is a bolt on for the KLX / DRZ 110 bikes.
- This hot new item will turn your existing stock or aftermarket frame into a cradle frame, without the big $$$ hit to your wallet It will fit KLX 110 and DRZ 110 .
- The kit comes with all the hardware to bolt it to your frame or you can have it welded on for added strength and protection Benefits * Added support to your motor (no more broken motor mounts) * Added strength to foot pegs (no more bent foot peg mounts) Features * Made in the USA * Tig Welded
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.3 / 5
192 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Bill Wade –
Very good for the money. All holes correctly lined up. A couple of minor issues. Have a half dozen or so 1/2″ flat washers handy in case you need to space the unit from the frame. I had to do this on the 2021 KLX110R and the 2022 KLX110L.Secondly the bolts that attach the plate to the engine case may be too long. I measured and fit the bolts to see where they would bottom out. They seemed long so I installed three flat washers under the heads on each to space them out a bit to match the OEM length.I’ll recommend this unit over the $100+ that some of the stores are selling. Fit and finish was good with only the trivial issues mentioned above.An installation tip. On the 110L take a ratchet strap and pull the rear tire up towards the fender. This will give you a bit more installation clearance from the swingarm on the two bolts that go through the frame.
Jeremy Griego –
I initially purchased this product for my KLX110 as it was far cheaper than any other brand of Cradle. Almost lit my 110 on fire after a half hour of attempted install. The spacers that are welded onto the plate were not aligned properly, I had to file them down so they mated with the surface of the peg bracket properly. After this, the nuts welded onto the cradle for the back (2 bigger bolts) were also not aligned. Very frustrated, i’ve installed these cradles multiple times, never having so much issue. I am assuming I just got a bad batch or something because this product clearly works for others as shown by the overall positive reviews.
Customer –
Make sure you hand thread all the bolts in before you start cranking down, this thing down line up eventually, but it takes some finessing
Jack –
This is a great alternative to the more expensive “brand name” models. It seems to be a great build quality, and has held up well to the jumps and abuse of my pit bike for the last couple months. Don’t waste your money on the more expensive brand name version, it’s the same this. Came with all the needed bolts and washers. And the bolts weren’t too long like everyone says, they were perfect. Thanks!
Grace K –
Good fitment and seems sturdy. I’ve been jumping with it for a while now and no issues. Definitely get one if you don’t have one for yours
James B. –
I’ve read reviews on Amazon that buyers say the bolt holes don’t line up. Mine couldn’t have fit any better. As with anything it is important to start all the bolts before tightening any. Make sure you take the pegs off and clean them and the bottom of the motor before you install to avoid getting any dirt in the threads or in between the surfaces of all the parts. Also helps to loosen or possibly remove the front bolts of the skid plate. If you do remove them, start them before you tighten any of the cradle bolts. It’s easier to start the left side first and the right side last as right side is the most easy one to line up. Again start these front bolts before you tighten any of the cradle bolts. Also, make sure you are not trying to put the skid plate on top of the cradle. It goes in between against the foot pegs like it was without a cradle. I recommend using a torque wrench for the bolts that go into the aluminum motor. As you can see in the photos I added flat washers that did not come with it. Not that critical if you don’t, I have hardened washers on hand. I hope these tips help inexperienced mechanics. Build quality/craftsmanship is good. Price is a lot cheaper than the name brand stuff. Keep in mind though this one is steel and more expensive ones may be aluminum. If weight is really important to you then you will want the aluminum. Me I’d rather save money on the part.
B Knight –
Bought for a klx 110 2024 and two for klx 110 2023 install was easy didn’t need any extra parts fit great work well.
Marshall Krotchen –
No issues with fitment at all. Was a little tricky to line up but not the products fault just awkward location to work on.