Description
Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.
Product Description
Important Notice
For stock wheel users, we suggest to use shape of existing lug nuts’ Flange, Seat Type, and Height as refernce before buying.
Compatibility chart from imaginebroward.org is only designated for Thread Pitch check. The actual fitment varies based on the requirements of wheels. Lug nuts/bolts seat has to strictly follow the wheel condition. If you are not sure, please do not hesitate to ask us.
How do I know If this product will fit my car?
- Use imaginebroward.orgconfirmedfit to check Make/Model/Year
- Check wheel studs are factory default
- Check wheel studs are less than 1.3” Long
- Check wheel lug mating surface is cone shape
- Check wheel lug hole flange requirement is 0.9”
Bolt Length Limit
Maximum Hub Studs Allowance: 1.3″ 33mm
Seat Way
Wheel Seating Surface Shape: Conical Seat 60 Degree
Thread Size
Wheel Hub Studs Thread: 1/2-20
(Bolts may age and cause thread mismatch)
Flange Limit
Mimimum Wheel Hole Flange: 0.87″ 22MM
Flavio –
Excelente acabado
Kenneth G. –
I was very impressed with the construction of these lug nuts. They are one piece, no ridiculous outer casting that swells up. The bevels fit perfectly with my aftermarket rims for my 91 XJ. I definitely recommend!!!! I also suggest that you use the square cut pieces of plastic that is supplied with the lugnuts for installation. And avoid using an impact wrench if you want to keep them scratch free. Before I did a full install I did a test fit on one lug and I scratched it not using the plastic and using an Impact wrench. It wasn’t really noticeable but I knew it. So because I have wheel spacers I just put the scratched one on the spacer stud. My Nephew bought the same ones but in chrome color for his 2013 Ford Fusion and I still used a breaker bar and the plastic for his installation. The chrome color probably won’t be noticeable at all, but still, just avoid the impact wrench and use the plastic. I have to change lugnuts for my 99 Grand Cherokee this summer and I am definitely going to buy these again. I highly recommend these.
Dustin Williams –
They’re pretty sturdy but I do see alittle bit of scratch on the nuts from taking it off with impact wrench. It does say not to use impact wrenches to take off or put on but I don’t care.
BarryK –
Great appearance. It states to not use impact guns as it will affect the appearance. Not sure how many people will abide by that…,they fit my 6,000 lb 6stud axle hub ends. No issues, don’t know how long they will continue to look nice and shiny. No complaints from me..
Digga10 –
Low profile and not long.So far look great but time will tell
David Damián –
Compatible con Mazda Navajo 1991 4x4O ford explorer son de buen material solo que en color negro se despostillaron pero en general buen producto.
森山 明広 –
コスパが良い。普通に使える。
Gigner –
I was looking for a solid set of 1/2-20 lug nuts to replace the old, swollen ones on my Dodge Nitro, and these MIKKUPPA replacements did not disappoint! Right out of the box, they feel sturdy, well-made, and durable—no cheap, flimsy materials here. The one-piece design is a huge improvement over the stock lug nuts, which tend to swell and become a nightmare to remove.Installation was a breeze. These fit my Nitro perfectly, threading smoothly without any cross-threading issues. The chrome finish not only looks great but also helps resist rust and corrosion, which is a big plus if you live in an area with harsh weather. Torqueing them down was no problem, and they’ve held tight without any loosening or wear after multiple drives.If you’re dealing with swollen, rusted, or damaged lug nuts on your Dodge Nitro (or any other compatible vehicle), these are an affordable and high-quality upgrade. No more struggling with oversized, swollen factory nuts—these are built to last!⭐️⭐️⭐️⭐️⭐️ (5/5) – Excellent fit, great quality, and no more headaches. Highly recommend!
Bruce –
Looked good, fit perfectly BUT….9 months later their rusting.
AMB Garage –
They are great quality, fits my 1999 Ford Ranger XLT perfectly, and they are very sturdy. A lot of lugnuts I’ve bought are pressed together and have a weird cap over them which come loose or break off when hit with the impact, but these are not like that. These are completely solid and honestly better quality than some I’ve paid twice as much for.
Deathtrap Garage –
Most stock acorn lug nuts are made of an inside nut covered in an aluminum shell. Moisture separated the metal over time. Spend the extra few bucks and order something like this. Replace them with ones that are machined from one piece. Seriously.
Ronald Herring –
Perfect fit and very nice looking product
Cloud –
Work good for 2014 Jeep Jku