Skip to content
Clear product details Fitment guidance Contact support
ExactFit Parts Specs and fitment made clearer.
My account Cart 0
13mm Injection Pump Idle Lock Nut Wrench & Engine Barring Tool & Injection Pump Gear Puller For Cummins 5.9L B/C Series, for Dodge Ram VE P7100 VP44 1989-2002 (3 Sets)

13mm Injection Pump Idle Lock Nut Wrench & Engine Barring Tool & Injection Pump Gear Puller For Cummins 5.9L B/C Series, for Dodge Ram VE P7100 VP44 1989-2002 (3 Sets) | Specifications and Fitment

$41.50

70 ratingsSource: Amazon
SKU: B-B07ZK3SGQH Category:

Use the specifications, images, available variations, fitment notes, and referenced part numbers to check this product against your application.

About this item

  • APPLICATION — 13mm Wrench for Cummins B series 5.9L diesel engines used in for Dodge trucks. Gear Puller for all Cummins with VE P7100 VP44 4BT 6BT Pumps. Will pull any 1989-2002 for Dodge Ram Cummins Injection Pump Gear. Engine Barring/Rotating Tool Works on for Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L diesels engines and Cummins B/C Series diesels engines.
  • Function — Designed to remove or install mounting bolts and idle lock nuts on the diesel injection pump. The fastest and effortless way to remove your injection pump gear. Time saver to turn the engine over or to turn the crank while preforming valve lash adjustment!
  • QUALITY — Wrench is manufactured from Quality steel designed with red rubber sleeve for nice touch. Gear Puller is made of Strong Cast Steel. Comes with Heavy Duty Flange Bolts. And the Engine Barring Tool is manufactured from 42 CrMo Steel ensure great tolerance and good performance.
  • WHAT YOU GOT — 1 X 13mm Idle Lock Nut Wrench, 1 X Injection Pump Gear Puller, 1 X Engine Barring Tool.
  • SATISFACTION GUARANTEE — If you are not satisfied with Camoo products, simply return it for a full-refund in 30 days. Guarantee with 12 months warranty. No worry about buying!

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.

Description

Check the specifications, dimensions, variation details, referenced part numbers, and available fitment evidence before matching this item to an application.

Product Description

13mm Idle Lock Nut Wrench, Injection Pump Gear Puller and Engine Barring Tool for 1989-2002 Dodge Ram (Set of 3)

Package Included:

  • 1 * 13mm Idle Lock Nut Wrench
  • 1 * Injection Pump Gear Puller
  • 1 * Cummins Engine Barring/Rotating Tool

13mm Idle Lock Nut Wrench

  • Designed to remove or install the 13mm injection pump mounting bolts and idle lock nuts on the diesel injection pump.
  • Works great on Cummins 5.9L engine in ’89-’98, 12V Dodge Cummins trucks .
  • Also useful on applications where these size fasteners are in a confined area.

Gear Puller

  • Heavy Duty Injection Pump Gear Puller
  • For Cummins engines which found in Dodge Ram Pickup Trucks.
  • Pull your VE, P-Pump, and VP44 pump gears.
  • Also work to remove your injection pump gear on a VE or P7100 powered 4BT engine.
  • Zero contact with your front cover and it is easy to pull.

Engine Barring/Rotating Tool

  • Works on Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L diesels engines and Cummins B/C Series diesels engines.
  • Insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2-Inch square drive ratchet or breaker bar and turn.

13mm Wrench for Cummins B series 5.9L diesel engines used in Dodge trucks.

Gear Puller for all Cummins with VE P7100 VP44 4BT 6BT Pumps. Will pull any 1989-2002 Dodge Ram Cummins Injection Pump Gear.

Engine Barring/Rotating Tool Works on Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L diesels engines and Cummins B/C Series diesels engines.

Product facts

Specifications

Canonical product
MP-US-B07ZK3SGQH
Source product ID
B07ZK3SGQH
Category
Tools & Equipment / Pullers / Special Application Pullers
Available images
9

No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.

Parameters, dimensions, material, fitment, and part numbers

Buying guidance

Quick decision

A special application pullers listing with source specifications kept visible for comparison.

Fit and size notes

  • No structured vehicle fitment was supplied; verify the product details against your application.

Before you buy

  • Compare the listing title, photos, package contents, and specifications with the part being replaced.
  • Confirm vehicle compatibility and installation requirements before ordering.

Customer feedback

Ratings and written reviews

4.2 / 5 70 source ratings

Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.

9 written reviews
5 stars 6
4 stars 2
3 stars 0
2 stars 0
1 star 1

9 reviews for 13mm Injection Pump Idle Lock Nut Wrench & Engine Barring Tool & Injection Pump Gear Puller For Cummins 5.9L B/C Series, for Dodge Ram VE P7100 VP44 1989-2002 (3 Sets) | Specifications and Fitment

  1. Imported from AmazonSource context: Verified Purchase

    Weston smith –

    Solid tool. Would not be possible to pull the gear or the pump off the motor without it. A must have if you have a Cummins.

  2. Imported from AmazonSource context: Verified Purchase

    Nismopowered –

    The barring tool is a very tight fit. Have to pry it out. Makes it hard to turn the engine but it does work. The J wrench did not fit my 1997 Cummings. It was 13mm my bolts are 15mm.

  3. Imported from AmazonSource context: Verified Purchase

    Jeff Mathews –

    Works good

  4. Imported from AmazonSource context: Verified Purchase

    Everett Ritchie –

    Works like it’s supposed to seems to be a good quality

  5. Imported from AmazonSource context: Verified Purchase

    Thomas B. –

    Wish the made it a ratcheting end but for how quick it got to my house so i could finish my 91 i was happy with it

  6. Imported from AmazonSource context: Verified Purchase

    Ken Jewell –

    the tools work great

  7. Imported from AmazonSource context: Verified Purchase

    Justin b. –

    The Chinese bolts broke in my IP gear. Now I have no way to take it off.

  8. Imported from AmazonSource context: Verified Purchase

    Tim –

    Looks like quality stuff, but ended up not needing to use it. Great seller though

  9. Imported from AmazonSource context: Verified Purchase

    Works great for the price –

    Great tools for the money. The puller also fits a few different models for cummins fuel pump gears.

Add a review

Your email address will not be published. Required fields are marked *

Related products